Bitcoind – Commands, RPC Protocol, Install Server ...

[ANN][ANDROID MINING][AIRDROP] NewEnglandcoin: Scrypt RandomSpike

New England
New England 6 States Songs:
Symbol: NENG
NewEnglandcoin is a clone of Bitcoin using scrypt as a proof-of-work algorithm with enhanced features to protect against 51% attack and decentralize on mining to allow diversified mining rigs across CPUs, GPUs, ASICs and Android phones.
Mining Algorithm: Scrypt with RandomSpike. RandomSpike is 3rd generation of Dynamic Difficulty (DynDiff) algorithm on top of scrypt.
1 minute block targets base difficulty reset: every 1440 blocks subsidy halves in 2.1m blocks (~ 2 to 4 years) 84,000,000,000 total maximum NENG 20000 NENG per block Pre-mine: 1% - reserved for dev fund ICO: None RPCPort: 6376 Port: 6377
NewEnglandcoin has dogecoin like supply at 84 billion maximum NENG. This huge supply insures that NENG is suitable for retail transactions and daily use. The inflation schedule of NengEnglandcoin is actually identical to that of Litecoin. Bitcoin and Litecoin are already proven to be great long term store of value. The Litecoin-like NENG inflation schedule will make NewEnglandcoin ideal for long term investment appreciation as the supply is limited and capped at a fixed number
Bitcoin Fork - Suitable for Home Hobbyists
NewEnglandcoin core wallet continues to maintain version tag of "Satoshi v0.8.7.5" because NewEnglandcoin is very much an exact clone of bitcoin plus some mining feature changes with DynDiff algorithm. NewEnglandcoin is very suitable as lite version of bitcoin for educational purpose on desktop mining, full node running and bitcoin programming using bitcoin-json APIs.
The NewEnglandcoin (NENG) mining algorithm original upgrade ideas were mainly designed for decentralization of mining rigs on scrypt, which is same algo as litecoin/dogecoin. The way it is going now is that NENG is very suitable for bitcoin/litecoin/dogecoin hobbyists who can not , will not spend huge money to run noisy ASIC/GPU mining equipments, but still want to mine NENG at home with quiet simple CPU/GPU or with a cheap ASIC like FutureBit Moonlander 2 USB or Apollo pod on solo mining setup to obtain very decent profitable results. NENG allows bitcoin litecoin hobbyists to experience full node running, solo mining, CPU/GPU/ASIC for a fun experience at home at cheap cost without breaking bank on equipment or electricity.
MIT Free Course - 23 lectures about Bitcoin, Blockchain and Finance (Fall,2018)
CPU Minable Coin Because of dynamic difficulty algorithm on top of scrypt, NewEnglandcoin is CPU Minable. Users can easily set up full node for mining at Home PC or Mac using our dedicated cheetah software.
Research on the first forked 50 blocks on v1.2.0 core confirmed that ASIC/GPU miners mined 66% of 50 blocks, CPU miners mined the remaining 34%.
NENG v1.4.0 release enabled CPU mining inside android phones.
Youtube Video Tutorial
How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 1 How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 2
How to CPU Mine NewEnglandcoin (NENG) in macOS
Decentralization and Community Driven NewEnglandcoin is a decentralized coin just like bitcoin. There is no boss on NewEnglandcoin. Nobody nor the dev owns NENG.
We know a coin is worth nothing if there is no backing from community. Therefore, we as dev do not intend to make decision on this coin solely by ourselves. It is our expectation that NewEnglandcoin community will make majority of decisions on direction of this coin from now on. We as dev merely view our-self as coin creater and technical support of this coin while providing NENG a permanent home at ShorelineCrypto Exchange.
Twitter Airdrop
Follow NENG twitter and receive 100,000 NENG on Twitter Airdrop to up to 1000 winners
Graphic Redesign Bounty
Top one award: 90.9 million NENG Top 10 Winners: 500,000 NENG / person Event Timing: March 25, 2019 - Present Event Address: NewEnglandcoin DISCORD at:
Please complete above Twitter Bounty requirement first. Then follow Below Steps to qualify for the Bounty: (1) Required: submit your own designed NENG logo picture in gif, png jpg or any other common graphic file format into DISCORD "bounty-submission" board (2) Optional: submit a second graphic for logo or any other marketing purposes into "bounty-submission" board. (3) Complete below form.
Please limit your submission to no more than two total. Delete any wrongly submitted or undesired graphics in the board. Contact DISCORD u/honglu69#5911 or u/krypton#6139 if you have any issues.
Twitter Airdrop/Graphic Redesign bounty sign up:
NENG v1.4.0 Android Mining, randomSpike Evaluation
RandomSpike - NENG core v1.3.0 Hardfork Upgrade Proposal
NENG Security, Decentralization & Valuation
Whitepaper v1.0
Step by step guide on how to setup an explorer:
Android with UserLand App (arm64/armhf), Chromebook (x64/arm64/armhf):
Linux Wallet (Ubuntu/Linux Mint, Debian/MX Linux, Arch/Manjaro, Fedora, openSUSE):
MacOS Wallet (10.11 El Capitan or higher):
Android with GNUroot on 32 bits old Phones (alpha release) wallet:
Windows wallet:
addnode ip address for the wallet to sync faster, frequently updated conf file:
How to Sync Full Node Desktop Wallet
Cheetah CPU Miner Software
Solo Mining with GPU or ASIC
How to Run Two Full Node in Same Desktop PC
ASIC/GPU Mining Pools Warning to Big ASIC Miners Due to DynDiff Algo on top of Scrypt, solo mining is recommended for ASIC/GPU miners. Further more, even for mining pools, small mining pool will generate better performance than big NENG mining pool because of new algo v1.2.x post hard fork.
The set up configuration of NENG for scrypt pool mining is same as a typical normal scrypt coin. In other word, DynDiff on Scrypt algo is backward compatible with Scrypt algo. Because ASIC/GPU miners rely on CPU miners for smooth blockchain movement, checkout bottom of "Latest News" section for A WARNING to All ASIC miners before you decide to dump big ASIC hash rate into NENG mining.
(1) Original DynDiff Warning: (2) New Warning on RandomSpike Spike difficulty (244k) introduced in RandomSpike served as roadblocks to instant mining and provide security against 51% attack risk. However, this spike difficulty like a roadblock that makes big ASIC mining less profitable. In case of spike block to be mined, the spike difficulty immediately serve as base difficulty, which will block GPU/ASIC miners effectively and leave CPU cheetah solo miners dominating mining almost 100% until next base difficulty reset.
Cminors' Pool
Features: anonymous sign up and trading. No restriction or limit on deposit or withdraw.
The trading pairs available: NewEnglandcoin (NENG) / Dogecoin (DOGE)
Trading commission: A round trip trading will incur 0.10% trading fees in average. Fees are paid only on buyer side. buy fee: 0.2% / sell fee: 0% Deposit fees: free for all coins Withdraw fees: ZERO per withdraw. Mining fees are appointed by each coin blockchain. To cover the blockchain mining fees, there is minimum balance per coin per account: * Dogecoin 2 DOGE * NewEnglandcoin 1 NENG
Latest News Aug 30, 2020 - NENG v1.4.0.5 Released for Android/Chromebook Upgrade with armhf, better hardware support
Aug 11, 2020 - NENG v1.4.0.4 Released for Android arm64 Upgrade / Chromebook Support
Jul 30, 2020 - NENG v1.4.0.3 Released for Linux Wallet Upgrade with 8 Distros
Jul 21, 2020 - NENG v1.4.0.2 Released for MacOS Upgrade with Catalina
Jul 19, 2020 - NENG v1.4.0.1 Released for MacOS Wallet Upgrade
Jul 15, 2020 - NENG v1.4.0 Released for Android Mining, Ubuntu 20.04 support
Jul 11, 2020 - NENG v1.4.0 Android Mining, randomSpike Evaluation
Jun 27, 2020 - Pre-Announce: NENG v1.4.0 Proposal for Mobile Miner Upgrade, Android Mining Start in July 2020
Jun 19, 2020 - Best Practice for Futurebit Moonlander2 USB ASIC on solo mining mode
Mar 15, 2020 - Scrypt RandomSpike - NENG v1.3.0.1 Released for better wallet syncing
Feb 23, 2020 - Scrypt RandomSpike - NENG Core v1.3.0 Relased, Hardfork on Mar 1
Feb 1, 2020 - Scrypt RandomSpike Proposal Published- NENG 1.3.0 Hardfork
Jan 15, 2020 - NewEnglandcoin Dev Team Expanded with New Kickoff
Jan 12, 2020 - Explanation of Base Diff Reset and Effect of Supply
Dec 19, 2019 - Shoreline_tradingbot version 1.0 is released
Sept 1, 2019 - NewEnglandcoin (NENG) is Selected as Shoreline Tradingbot First Supported Coin
Aug 15, 2019 - Mining Update on Effect of Base Difficulty Reset, GPU vs ASIC
Jul 7, 2019 - CPU Mining on macOS Mojave is supported under latest Cheetah_Cpuminer Release
Jun 1, 2019 - NENG Fiat project is stopped by Square, Inc
Apr 21, 2019 - NENG Fiat Project is Launched by ShorelineCrypto
Apr 7, 2019 - Announcement of Fiat Project for all U.S. Residents & Mobile Miner Project Initiation
Apr 1, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange
Mar 27, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange
Mar 17, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange
Feb 26, 2019 - Community Project - NewEnglandcoin Graphic Redesign Bounty Initiated
Feb 22, 2019 - Dev Policy on Checkpoints on NewEnglandcoin
Feb 20, 2019 - NewEnglandCoin v1.2.1 Released to Secure the Hard Kork
Feb 11, 2019 - NewEnglandCoin v1.2.0 Released, Anti-51% Attack, Anti-instant Mining after Hard Fork
Jan 13, 2019 - Cheetah_CpuMiner added support for CPU Mining on Mac
Jan 12, 2019 - NENG Core v1.1.2 Released to support MacOS OSX Wallet
Jan 2, 2019 - Cheetah_Cpuminer v1.1.0 is released for both Linux and Windows
Dec 31, 2018 - Technical Whitepaper is Released
Dec 28, 2018 - Cheetah_Cpuminer v1.0.0 is released for Linux
Update on Dec 14, 2018 - NENG Blockchain Stuck Issue
Nov 27, 2018 - Exclusive for PC CPU Miners - How to Steal a Block from ASIC Miners
Nov 28, 2018 - How to CPU Mine a NENG block with window/linux PC
Nov 29, 2018 - A Warning to ASIC Miners
Disclosure: Dev Team Came from ShorelineCrypto, a US based Informatics Service Business offering Fee for service for Coin Creation, Coin Exchange Listing, Blockchain Consulting, etc.
submitted by honglu69 to NewEnglandCoin [link] [comments]

Bitcoin core configuration in Windows

I've installed Bitcoin Core on Windows with the installer. I don't know how to increase the number of connections. Currently, it's always 8.
Several sources on the internet claim that custom configuration belong to a bitcoin.conf in the AppData/Bitcoin directory. But that doesn't work for me. I tried. In fact, I found out that the configuration including the datadir is currently contained in the registry. Not a single source I could found tells me that the registry contains these config values, so I'm kinda bummed out by this.
In any case, does that mean that I have to add a config value in the registry? And if so, how? The config names are different, namely, the registry config names are in camel case, while the names in bitcoin.conf are like "maxconnections=150". Help!
Edit: I consider the possibility that using the bitcoin.conf actually works and I made a mistake.
Edit2: Only 8 outgoing connections are possible (without addnode), so I opened the firewall as suggested.
Edit3: I finally get incoming connections. It's still slow but I'm optimistic that the speed will increase. It almost feels like synching an Ethereum node ffs.
Edit4: After having had 16 peers at some point yesterday, I'm back to 8 peers and no incoming connections. Speed is 1.3% per hour.
Edit5: I'm under the impression that I simply underestimated the size of the blockchain. I'm used to download huge files within minutes but 200gb is certainly something else. My bandwidth doesn't seem to be used to its full extent but it spikes up to the maximum throughput from time to time, so I guess this is the limiting factor after all. And some people want even larger blocks? F*** that.
submitted by HelloImRich to Bitcoin [link] [comments]

A tour of the Gridcoin wallet

Hey guys, I thought I would put together an in-depth tour of the Gridcoin wallet software for all of our recent newcomers. Here I'll be outlining all the features and functions the windows GUI wallet has to offer, along with some basic RPC command usage. I'll be using the windows wallet as an example, but both linux and macOS should be rather similar. I'll be including as many pictures as I can as embedded hyperlinks.
Edit: Note that since I originally made this there has been a UI update, so your client will be different colors but all the button locations are in the same place.
This is my first post like this, so please forgive me if this appears a little scatter-brained.
This will not cover the mining setup process for pool or solo miners.
When you launch the wallet software for the first time you should be greeted with this screen.


After that prompt, you should be left sitting on the main overview tab with several fields on it.
From top to bottom:


Now onto the other tabs on the left side. Currently we're on the Overview tab, lets move down to the Send tab. This tab it pretty self-explanatory, you use it if you want to send coins, but I'll go over the fields here:
  • Pay To: Enter a valid gridcoin address to send coins too. Gridcoin addresses always start with an S or and R.
  • Label: Enter a label here and it will put that address in your "address book" under that label for later use. You can leave it blank if you don't want it in your address book.
  • Message: Enter a message here if you want it attached to your transaction.
  • Amount: How many coins you want to send.
  • Add Attachment: Leave this alone, it is broken.
  • Track Coins: This doesn't do anything.


Now down to the Receive tab. Here you should have a single address listed. If you double click on the label field, you can edit it's label.
  • New: Generate a new address.
If you click on an address, the rest of the options should be clickable.
  • Copy: Copy the selected address to your clipboard.
  • Show QR Code: Show a scan-able QR code for the selected address.
  • Sign Message: Cryptographically sign a message using the selected address.


The Transactions tab is pretty boring considering we have no transactions yet. But as you can see there are some sorting tools at the top for when you do have transactions listed.


The Address Book is where all the addresses you've labeled (that aren't yours) will show up.
  • Verify Message: Verifies a message was signed by the selected address.
The rest of the functions are similar to the functions on the Receive tab.


Onto the Voting tab. There wont be any polls because we aren't in sync yet.
  • Reload Polls: Pretty self-explanatory, I've never had to use this.
  • Load History: By default, the wallet will only display active polls. If you want to view past polls you can use this.
  • Create Poll: You can create a network-wide poll. You must have 100,000 coins as a requirement to make a poll. (Creating a poll does not consume the coins)
Here's what the Voting tab will look like once you're in sync


Now onto the context bar menus on the top.
Under File you have:
  • Backup Wallet/Config: This lets you backup your wallet configuration file just in case.
  • Export: You can export your Transactions tab or Address Book in CSV format.
  • Sign message: Does the same thing as on the Receive tab.
  • Verify message: Does the same thing as on the Address Book tab.
  • Exit: Close the wallet.
Under Settings you have:
  • Encrypt Wallet: Encrypts your wallet with a password. (we'll come back to this)
  • Change Passphrase: Allows you to change your encryption password.
  • Options: Opens the options menu. (We'll come back to this)
Under Community you have:
Under Advanced you have:
  • Advanced Configuration: Opens the Advanced Configuration menu. (Not so advanced if you ask me)
  • Neural Network: Allows you to view solo miners project statistics. It will be largely blank if you're not in sync yet.
  • FAQ: Don't touch this, It is broken.
  • Foundation: Don't touch this, It is broken.
  • Rebuild Block Chain: Starts the client syncing from 0. Don't worry, using this will not make you lose coins.
  • Download Blocks: Downloads the latest official snapshot, can help speed up syncing. The download progress tends to sit at 99.99% for a long time, don't worry, it's working.
Under Help you have:
  • Debug window: Opens the debug window. (We'll come back to this)
  • Diagnostics: Don't touch this, it is broken. This has since been fixed. You can use this to see if there is anything wrong with your setup.
  • About Gridcoin: Opens the About Dialog. This gives you your client version and other information.


Now back to the options menu under Settings > Options.
Here we have the options menu main tab:
  • Pay transaction fee: The transaction fee that will be automatically paid when you make a transaction.
  • Reserve: You can reserve an amount so that it will always be available for spending.
  • Start Gridcoin on system login: Pretty self-explanatory
  • Detach databases at shutdown: Speeds up shutdown, but causes your blockchain file to no longer be portable.
On the Network tab:
  • Map port using UPnP: Attempts to connect to nodes through UPnP.
  • Connect through SOCKS proxy: Allows you to connect through a proxy.
The window tab is pretty self-explanatory.
The Display tab is also pretty self-explanatory, with the exception of:
  • Display coin control features (experts only!): This allows you to have a great deal of control over the coins in your wallet, check this for now and I'll explain how to use it further down. Don't forget to click "Apply".


Now that all of that is out of the way. The first thing you'll want to do is encrypt your wallet. This prevents anybody with access to your computer from sending coins. This is something I would recommend everyone do.
Go to Settings > Encrypt Wallet and create a password. YOU CANNOT RECOVER YOUR COINS IF YOU FORGET YOUR PASSWORD.
Your wallet will close and you will have to start it up again. This time when it opens up, you should have a new button in the bottom left. Now if you want to stake you will have to unlock your wallet. Notice the "For staking only" box that is checked by default. If you want to send a beacon for solo mining or vote, you will need to uncheck this box.


Before we continue, Let's wait until we're in sync. Depending on your internet speeds, this could take from several hours to over a day or 2. This can be sped up by using Advanced > Download Blocks, but this can still take several hours.
This is what an in-sync client should look like. Notice the green check to the right of the Receive tab. All of these icons give you information when you hover your mouse over them.
The lock
The arrow tells you if you're staking. If you aren't staking, it will tell you why you're not staking. If you are staking it will give you an estimated staking time. Staking is a very random process and this is only an estimate, not a countdown.
The connection bars tell you how many connections to the network you have.
The check tells you if you're in sync.


Now I've said "stake" about a million times so far and haven't explained it. Gridcoin is a Proof of Stake (PoS) coin.
Unlike bitcoins Proof of Work (PoW), PoS uses little system resources, so you can use those resources for scientific work. PoS works by users "Staking" with their balance. The higher the balance, the higher the chance to create, or "stake" a block. This means you need to have a positive balance in order to stake. Theoretically, you can stake with any amount over 0.0125 coins, but in practice it's recommended to have at least 2000 coins to reliably stake.
Staking is important for solo miners, because they get paid when they stake. Pool miners don't need to stake in order to get paid however. So if you want to solo mine, you'll need to buy some coins from an exchange or start in the pool first and move to solo when you have enough coins.
In addition to Research Rewards for miners, anyone who holds coins (solo miners, pool miners, and investors) gets 1.5% interest annually on top of your coins. So it can be beneficial for pool miners to stake as well.
Here is a snippet of what a research rewards transaction looks like from my personal wallet. I have a label on that address of "Payout address" as you can see here.


At this point you'll need some coins. You can use one of our faucets like this one or this one to test coin control out.
First let me explain what a UTXO is. UTXO stands for Unspent Transaction Output. Say you have an address with 0 coins in it, and someone sends you 10 coins like I've done here. Those 10 coins are added to that address in the form of a UTXO, so we have an address with one 10 coin UTXO in it.
Now we receive another 5 coins at the same address, like so. Now we have an address with one 10 coin UTXO and one 5 coin UTXO. But how do we view how our addresses are split up into different UTXOs?
Earlier we checked the "Display coin control features" box in Settings > Options > Display. Once that's checked you'll notice there's another section in the Send tab labeled "Coin Control Features". If you click the "Inputs" button, you'll get a new window. And look, there's our 2 UTXOs.
All UTXOs try to stake separately from each other, and remember that the chance a UTXO has to stake is proportional to it's size. So in this situation, my 10 coin UTXO has twice the chance to stake as my 5 coin UTXO. Now wallets, especially ones that make a lot of transactions, can get very fragmented over time. I've fragmented my wallet a little so I can show you what I'm talking about.
How do we clean this up? We can consolidate all this into one UTXO by checking all the boxes on the left and selecting OK.
Now pay attention to the fields on the top:
  • Quantity: The total amount of UTXOs we have selected.
  • Amount: The total amount of coins we have selected.
  • Fee: How much it would cost in fees to send all those UTXOs (more UTXOs = more transaction data = more fees)
  • After Fee: Amount - Fees.
  • Bytes: How large the transaction is in bytes.
  • Priority: How your client would prioritize making a transaction with this specific set of UTXOs selected had you not used coin control.
  • Low Output: If your transaction is less than 0.01 coins (I think).
  • Change: What you will get back in change.
  • custom change address: You can set the address you get your change back at, by default it will generate a new address.
So let's fill out our transaction so we end up with 1 UTXO at the end.
In "Pay To:" Just put any address in your wallet, and for the amount put what it has listed in the "After Fee" Field. Just like this.
Notice how we get no change back.
Now click "Send", we'll be prompted to enter our passphrase and we're asked if we want to pay the fee, go ahead and click "Yes".
Now if we go back to the Overview tab we get this funky icon. If you hover your mouse over it, it says "Payment to yourself", and the -0.0002 GRC is the network transaction fee.
(Ignore the first one, that was me fragmenting my wallet)
Now if we look at the Coin Control menu, we can see that we've slimmed our wallet down from 7 UTXOs to 1.
Now why would you want to use coin control?
2 Situations:
  1. UTXOs less than 0.0125 coins cannot stake. So you can combine a lot of tiny, useless UTXOs into 1 bigger one that can stake.
  2. After a UTXO stakes, it cannot stake for another 16 hours. So if you have 1 large UTXO that is big enough to stake more than once every 16 hours, you can split it into smaller UTXOs which can allow you to stake slightly more often.
  3. By default, the wallet will always generate a new address for change, which can make your wallet get very messy if you're sending lots of transactions. Keep in mind that more UTXOs = larger transactions = more fees.
Sidenote - When you stake, you will earn all research rewards owed reguardless of which UTXO staked. However, you'll earn the 1.5% interest for that UTXO. Not your whole wallet.


A fork is when the network splits into multiple chains, with part of the network on each chain. A fork can happen when 2 blocks are staked by different clients at the same time or very close to the same time, or when your client rejects a block that should have been accepted due to a bug in the code or through some other unique circumstance.
How do I know if I'm on a fork?
Generally you can spot a fork by looking at the difficulty on your Overview tab. With current network conditions, if your difficulty is below 0.1, then you're probably on a fork.
You can confirm this by comparing your blockhash with someone elses, like a block explorer.
Go to [Help > Debug Window > Console]. This is the RPC console, we can use to do a lot of things. You can type help to get a list of commands, and you can type help [command you need help with] (without the brackets) to get information on a command. We'll be using the getblockhash [block number] command.
Type getblockhash [block number] in the console, but replace [block number] with the number listed next to the "Blocks:" field on the Overview tab.
This will spit out a crazy string of characters, this is the "blockhash" of that block.
Now head over to your favorite block explorer, I'll be using gridcoinstats. Find the block that you have the hash for, use the search bar or just find it in the list of blocks.
Now compare your hash with the one gridcoinstats gives you. Does it match?
If it matches, then you're probably good to go. If it matches but you still think you're on a fork, then you can try other block explorers, such as or
If it doesn't match, then you need to try to get off that fork.
How do I get off a fork?
  1. Just wait for an hour or two. 95% of the time your client is able to recover itself from a fork given a little time.
  2. Restart the client, wait a few minutes to see if it fixes itself. If it doesn't restart again and wait. Repeat about 4 or 5 times.
  3. Find where the fork started. Using the getblockhash command, go back some blocks and compare hashes with that on a block explorer so you can narrow down what the last block you and the block explorer had in common. Then use reorganize [the last block hash you had in common]. Note that reorganize takes a blockhash, not a block number.
  4. Use Advanced > Download Blocks.
  5. If none of this works, you can take a look at social media (reddit/steemit) and see what other people are saying.


Your configuration file depends on your operation system:
  • On Windows: %appdata%\GridcoinResearch\
  • On Linux: ~/.GridcoinResearch/
  • On MacOS: /Users/USERNAME/Library/Application/Support/GridcoinResearch/
And it should look like this.
If you open up your gridcoinresearch.conf, you'll see the default one it generated. Note that if you entered your email earlier, the first line will have your email on it instead of "investor". If you decided you want to solo mine but didn't enter your email when you first started the wallet, go ahead and put your email on the first line in place of "investor". If you're a pool miner, just leave it as "investor".
Next, it's recommended that you use the addnodes on the gridcoin wiki. So our gridcoinresearch.conf will look like this.
A useful line for solo miners is PrimaryCPID=[YOUR CPID]. Sometimes your wallet can pick up on the wrong CPID so it's good to have that in there if you're solo mining.


A listening node is a node that listens for blocks and transactions broadcasted from nodes and forwards them on to other nodes. For example, during the syncing process when you're getting your node running for the first time, you're downloading all the blocks from listening nodes. So running a listening node helps support the network.
Running a gridcoin listening node is simple. All you need to do is add listen=1 to your gridcoinresearch.conf and you need to forward port 32749 on your router.
If you don't know how to port forward, I'd suggest googling "How to port forward [your router manufacturer]".

QUICK LINKS Official Website Unofficial Website Block Explorer Block Explorer Faucet Faucet
Gridcoin Wiki
Gridcoin Github
Arikado Pool
And that's all I have for now!
I plan to keep this post up-to-date with changes in the client. So if anyone has any suggestions, have clarifications they want made, or maybe I got something wrong, then please feel free to leave a comment below or PM me!
submitted by Personthingman2 to gridcoin [link] [comments]

PIVX Core Wallet 3.0.5 final release (November 13th, 2017) - Mandatory Upgrade

Github release link
Forum Post

Important Notes

Upgrade instructions

1- Download the appropriate release for your platform from the Github release link. For command line installs/updates this link may help.
2- Start up your client and see if you are on the wrong chain by using this link (Am I forked?) or manually comparing your latest block hash against the [block explorer](
3- If you are on the correct chain, let it fully sync (or as far as it will go) and then repeat step 2. If you are still on the right chain move on to step 4. If you're on the wrong chain, download the chainstate from this link (mirror) and follow the instructions to install it. Do NOT delete wallet.dat or your backups folder. Once this is done, restart your client and let it finish syncing
  1. stop your wallet and/or daemon
  2. locate the folder with the blockchain folders (usually ~/.pivx/)
  3. do a complete(!) backup of this folder in case something goes wrong
  4. completely remove the folders "blocks", "chainstate", "sporks" and "zerocoin"
  5. download one of the snapshot-files (preferably the newest one) above into this folder
  6. unpack the snapshot file: 'unzip '
  7. the folders deleted above are now replaced by the ones from the snapshot
  8. restart your wallet and/or daemon
4- On this step you should be fully synced and on the right chain. Using the debug screen or pivx-cli, use the command
spork show 
to output your spork status. Have a look at spork 16 and make sure the value is 1510179528 (now 1609459199). If it is, go ahead and start staking.
If you are having trouble getting the correct value for spork 16, try adding nodes to your pivx.conf file that are protocol 70912. A list of 70912 nodes can be found at . This can be done from the debug menu or with pivx-cli by saying
addnode add 

Notable Changes

libzerocoin Exploit Fix

zPIV relies on a 3rd party library called libzerocoin. All currencies that utilize the zerocoin protocol use libzerocoin, and many of those currencies have been exposed to an exploit which allowed for the creation of multiple zero-knowledge spending proofs for one single zerocoin mint. The PIVX developers were able properly identify the exploit, track down any fraudulent spending proofs, link the fraudulent spending proofs with their one valid proof that they were mutated from, and remove any mints from the accumulators that were derived from the invalid spends.

zPIV Maintenance Mode Spork

Handling the above noted libzerocoin exploit required the PIVX team to immediately release a patched wallet to as many users as possible which rejected bad spends and also disabled all zPIV transactions in general. The process of releasing a patched wallet in such a small time frame is frustrating and difficult for all members of the PIVX team and especially users of PIVX. The PIVX developers have added a new spork which allows for zPIV transacting to be turned on/off without having to release a patched wallet. This will allow much smoother operation if any problems occur in the future, and should also allow exchanges and 3rd party services to continue to operate even if zPIV is in maintenance mode.

Accumulator Code Refactor

The zPIV accumulator code has undergone a major refactor. Accumulators are one of the most essential components of the zerocoin protocol, and also one of the most computationally expensive parts of the protocol. This refactoring speeds up syncing and spending of zPIV by over 5x. The new code also allows for spending of zPIV with only 2 required mints occurring on the network after your mint has been added, whereas before 3 were required. This refactor allows for lighter resource load and a smoother user experience.

Money Supply Indexing

The exploit in libzerocoin threw off some of the wallet's internal money supply calculations for both the zPIV supply and the PIV supply. User's wallet's will automatically recalculate the supply on block 908001. User's also have the ability to recalculate supply using the startup flag reindexmoneysupply.

More Extensive Tracking of zPIV Supply Through RPC

More information has been added to the getinfo and getblock RPC calls, which now display the total zPIV supply as well as the balance for each zPIV accumulator.

Multisig GUI

Provides functionality which is currently only available through raw transactions. Multisignature addresses require signatures from multiple parties before coins belonging to the address are spent. Accessed through the File dropdown menu.



  • Will I lose piv or zpiv?
    • No. Backup your wallet.dat again for good measure and never delete a wallet.dat file.
  • My wallet is stuck on block ?
    • Check if you're forked (Am I forked?) and then check if you're really on v3.0.5. If you're on the right version and chain, just hang tight and your wallet will find a good node to sync with eventually. Contact support if it's more than a few hours and the problem persists
  • My zPIV balance is incorrect
    • Contact support in discord or via the Support Portal. Please note that during the upgrade period and zerocoin maintenance mode there may be delays.
submitted by turtleflax to pivx [link] [comments]

How to Mine BiblePay on Windows

This guide is outdated, please refer to:
IMPORTANT - Evolution Upgrade:
Quick Start
Evolution Upgrade Information
Getting Started with Evolution
Generic Smart Contracts
What is BiblePay Evolution?
Windows Guide: 1. Download 32 or 64 bit .exe from 2. Double Click / Run .exe file and step through Install process 3. Run BiblePay 4. Click Tools >> One Click Mining, (Or set up mining manually with steps a through d below)
     a. Open File Explorer, in address bar type: %appdata%      b. Press Enter      c. Go to BiblepayEvolution folder      d. Open biblepay.conf file for editing, add lines and Save gen=1 genproclimit=1 
NOTE: addnode is used to give the wallet a starting node to connect to and sync with gen=1 turns on mining by default when the wallet is opened genproclimit=1 sets number of mining threads to 1 by default

5. Close BiblePay and Run it again 6. In BiblePay, go to Tools menu, Click Debug Console 7. Type these commands into the debug console:
getinfo getmininginfo help 
NOTE: getinfo will show you what block number your wallet is currently on and the version number getmininginfo will show you how many threads are running and how much mining hash you have help will show you all the other commands you can use

Threads: 8. To change number of threads to use up for mining
a. Edit %appdata%/BiblepayEvolution/biblepay.conf file: Find with File Explorer or inside the wallet go to Menu >> Tools >> Open Wallet Configuration File
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with the number of threads you want to use Open Task Manager to view CPU usage)

Using the Pool:
NOTE: To use the pool you must now use the external miner, not the wallet miner
  1. Set up an account on pool website:
  2. Create Worker Username(s) - Workers tab >>> Add (NOTE: Your Worker Username needs to be unique)
  3. Enable pool and add Worker Username in %appdata%/BiblepayEvolution/biblepay.conf file, add these lines:
    pool= workerid=insertWorkerUsernameHere
4. Restart BiblePay
How to Withdraw Coins From Pool? The pool holds onto your coins, go to "Account" >> "Withdraw" to withdraw your coins In your BiblePay Wallet go to "File" >> "Receiving Address" and you can right click and copy the address and paste it into the Pool's Withdraw screen as the "Destination Address", then click the "Withdraw" button and the coins will be sent from the Pool to your Wallet
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws
Why use a Pool? As the network hash rises (as more miners are mining), it can take longer and longer to solve a block, by using the pool, everyone works together with all of their hash power to solve blocks, and the reward gets split between everyone who contributed based on how much they contributed in hash.
With solo mining (not using the pool) it may take 1 month to finally solve a block and get large BBP reward, with pool you can get small frequent BBP rewards every ~30 minutes. (BBP meaning BiblePay coins)

How to Update: Download exe from and install again, your wallet will stay intact

Your wallet.dat stores your private keys that contain the access to your coins, this file is backed up every 24 hours in the backups folder, We also recommend that you save a copy of this file in other places, like a flash drive
Learn More about Backing Up your Wallet.dat

QUESTION: How long does it take for coins to mature? If you're solo mining, the coins become mature after ~100 blocks. If you're using the pool, they become mature after 24 hours
QUESTION: How do I know if I am currently mining? In your wallet >> In Top left Menu select "Tools" >> Click "Debug Console" Type in the command: getgenerate If it returns true, mining is turned on command: getmininginfo Will show how much "hashps" (hashing) your pc is doing, "genproclimit" will show how many mining threads you are using "poolmining" will be show value of true if you are successfully mining on the pool

How to Buy or Sell BBP coins?
You can buy and sell BBP coins for Bitcoin on the Exchanges we are listed on: SouthXChange:

Misc: Building headless Bitcoin and Bitcoin-qt on Windows

Windows Mining Video Tutorial by copper101great
submitted by togoshige to BiblePay [link] [comments]

How to Mine BiblePay on Linux

This guide is outdated, please refer to:
IMPORTANT - Evolution Upgrade:
Quick Start
Evolution Upgrade Information
Getting Started with Evolution
Generic Smart Contracts
What is BiblePay Evolution?
Recommend 2GB RAM or can get stuck compiling (if 1GB RAM can use Swap File) Use Ubuntu 16.04
apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler apt-get install git apt-get install curl build-essential libtool autotools-dev automake pkg-config python3 bsdmainutils cmake sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev git clone prefix=x86_64-pc-linux-gnu cd biblepay-evolution/depends make -j4 # Choose a good -j value, depending on the number of CPU cores available cd .. ./ #Note: if echo `pwd` does not return your working directory, replace it with your working directory such as /biblepay-evolution/ ./configure --prefix `pwd`/depends/x86_64-pc-linux-gnu make # See more here: # 

NOTE: if server is 1GB RAM, before running last command "sudo make", set up a swap file
free #check if swap is 0 dd if=/dev/zero of=/vaswap.img bs=1024k count=1000 mkswap /vaswap.img swapon /vaswap.img free #check if swap is 1024 sudo make 

cd src ./biblepayd -daemon 
Your GUI program will be located in: /biblepay-evolution/src/qt
You can also run it in the background (to free up your terminal) if you call it with:
./biblepay-qt & 
To start mining, instructions are the same as for Windows: Go to Tools -> Debug Console
Execute this command (to start mining with 8 threads)
setgenerate true 8 
From there you can use all other commands such as getmininginfo, getwalletinfo, etc. Execute help command to get the list of all available commands.
Note: GUI will be built automatically only if you meet the requirements for qt library, i.e. make sure you ran this line before compiling:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler 
BIBLEPAY is now Running!

Stop BiblePay and set up the config file to get starting nodes to sync with and enable mining:
./biblepay-cli stop cd ~/.biblepayevolution/ vi biblepay.conf gen=1 genproclimit=1 
Escape Key + : (Colon Key) + w + q + Enter (saves file and quits)

addnode --- adds a node to the list of nodes to connect to gen=1 --- turns on mining genproclimit --- sets number of threads to use when mining

Run BiblePay again and fully sync with network
cd ../biblepay-evolution/src ./biblepayd -daemon ./biblepay-cli getinfo 

./biblepay-cli help ./biblepay-cli getaccountaddress "" ./biblepay-cli getinfo ./biblepay-cli getmininginfo ./biblepay-cli setgenerate true 8 ./biblepay-cli sendtoaddress "insertAddressHere" 777 "" "" true ./biblepay-cli stop ./biblepayd -daemon top #CPU usage q to quit 

MINING THREADS: To change number of threads to use up for mining
a. Edit home/yourusername/.biblepayevolution/biblepay.conf file:
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with number of threads Use top command to view CPU usage)

NOTE: To use the pool you must now use the external miner, not the wallet miner
  1. Set up an account on pool website:
  2. Create Worker Username(s) - Workers tab >>> Add
  3. Enable pool and add Worker Username in ~/.biblepayevolution/biblepay.conf file, add these lines and save:
    pool= workerid=insertWorkerUsernameHere
4. Restart BiblePay
./biblepay-cli stop ./biblepayd -daemon 
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws


### Turn off/stop BiblePay
cd /home/yourname/biblepay-evolution/src ./biblepay-cli stop 

### Pull down latest Biblepay code and build it
cd /home/yourname/biblepay-evolution git pull origin master sudo make 

### Turn BiblePay back on and check version number
cd src ./biblepayd -daemon ./biblepay-cli getinfo ./biblepay-cli setgenerate true 8 

./biblepay-evolution/src/biblepay-cli stop ; cd && cd biblepay-evolution/ && git pull origin master && sudo make && cd src && ./biblepayd -daemon && sleep 90 && ./biblepay-cli getmininginfo 
Note: the ";" says do this after, regardless of the outcome Note: && says do this after only if previous command finished with no errors

To speed up the compile time, add -j4 or -j8 after make. This way it compiles using 4 or 8 threads instead of just 1.
./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" sudo make -j8 

RSYNC stop biblepay from your nodes compile on your fastest machine then rsync with your machines only src folder is required
rsync -avuz /root/biblepay-evolution/src/ [email protected]:/root/biblepay-evolution/src/
people make cron jobs and rsync automatically


Unofficial Bash Script

Official Ubuntu Package

Unofficial Ubuntu Package

Unofficial Mine in One Line


DOCKER IMAGES (NOTE: I havent tested these, use at your own risk)
submitted by togoshige to BiblePay [link] [comments]

Bitcoin ABC 0.18.8 released!

Bitcoin ABC version 0.18.8 is now available from:
This release includes the following features and fixes: - dumpwallet now includes hex-encoded scripts from the wallet in the dumpfile - importwallet now imports these scripts, but corresponding addresses may not be added correctly or a manual rescan may be required to find relevant· transactions - getblock 2 (verbosity = 2) now returns hex values in transaction JSON blobs - Remove miner policy estimator in favor of minimum fees, also remove fee_estimates.dat. Old copies will be left in place. - The log timestamp format is now ISO 8601 (e.g. "2019-01-28T15:41:17Z") - Behavior change: in case of multiple values for an argument, the following rules apply: - From the command line, the last value takes precedence - From the config file, the first value takes precedence - From the config file, if an argument is negated it takes precedent over all the previous occurences of this argument (e.g. "foo=2 \n nofoo=1" will set foo=0) - The configuration files now support assigning options to a specific network. To do so, sections or prefix can be used: main.uacomment=bch-mainnet test.uacomment=bch-testnet regtest.uacomment=bch-regtest [main] mempoolsize=300 [test] mempoolsize=200 [regtest] mempoolsize=50 The addnode=, connect=, port=, bind=, rpcport=, rpcbind= and wallet= options will only apply to mainnet when specified in the configuration file, unless a network is specified.
submitted by jasonbcox to BitcoinABC [link] [comments]

KoreCoin v2.0 [KORE]New ERA - VOIP WALLET -100% ANON - 100% PoS - PoBAnon

A Kore Twitter Campaign has been activated at! Take 30 seconds, earn some free coin, and support Kore in the process! Check it out at:
New block explorer:
Important Mandatory Update: Please bear with us while we await the new OP page/wallet release.
IF you don't have these latest wallets installed we are requesting you update them ASAP. There are some old wallets out there causing issues with the staking.
1-Windows Wallet standard: Windows Wallet with updated Peers.dat file so the wallet will sync easier.!lBlGmL7R!UW-lzmtfHa1OeC0dn_D18jq4KXejST32oyeNApQVqOE Current peers.dat file to get the wallet to connect/sync.
Use the link below to go to the "Kore Support" thread and replace your peers.dat file with the most current one uploaded.
Peers & Nodes: Current Peers: 43ddpe3mgqu6im72.onion rdglputx5w4hsahq.onion dqdwqq6siopitcnx.onion imtxip6b3epoydq7.onion c7golffjz4qcomts.onion mtxip6b3epoydq7.onion nvye5tclv4gsp4qz.onion bqr3uvoqn7afaftn.onion oxk3k46qpyewkuha.onion xjmdb3rrlp5mjsor.onion nelcm3y2yuwkubww.onion pgtp5zcbhzivkdhy.onion eldldqcauon5fjye.onion ygjegzdh56fuielv.onion fy225sytea4x2d5d.onion bo5whi6igdfujywm.onion 7qmaqqvbcgkz46wy.onion dv6eypxco54m2yil.onion dxtf2khtvtrlt5x3.onion 3qtpdtcoeajm2u6u.onion 56ozxvu5gcljant6.onion 5svpy4wrwtjdoqb6.onion 7kerj4xmvc7pgvf4.onion gfnmkcixbz7nekgr.onion xsuhp3s4nwciyopc.onion ua3np4ut2zxubqow.onion ap2u6b77yi5esd72.onion rnwgen4v5vvgyrui.onion suifi73rcv6xptco.onion 5lxnox7rk77qemdo.onion uuvjof5votogzak.onion
OLD: addnode=xjmdb3rrlp5mjsor.onion:28556 addnode=dxtf2khtvtrlt5x3.onion:28556 addnode=oxk3k46qpyewkuha.onion:28556 addnode=266polqfpc22sn4b.onion:28556 addnode=tvmhij7hyrqir5y2.onion:28556 addnode=culqahwoixao4zgp.onion:28556 addnode=copqf7fhnf4ve2pz.onion:28556 addnode=xx37ikzbjib5wdhm.onion:28556 addnode=ua3np4ut2zxubqow.onion:28556 addnode=iqtgfnjunu4ixdqq.onion:28556 addnode=gpy2co2ik7jn7woy.onion:28556 addnode=c7golffjz4qcomts.onion:28556 addnode=5rpb5tuybqdfmtbk.onion:28556 addnode=urc3dssckhvsbswb.onion:28556 addnode=gfnmkcixbz7nekgr.onion:28556
Up to date Bootstrap and instructions Here: NOTE: Use at your own risk...
KoreCoin_OSX_2.2.1.dmg - no VoIP:!LN9UTIiB!keSf4dFGeF0qlMQ5xmXNIAZIpdEl8mwTvtJLmYbLRoI
2-For a custom Linux Version go to end of post: Version: 64 bit Ubuntu Linux 14.04 LTS Trusty
3-KoreCoin Website:
4-Source Code - GitHub Link:
5-KORE Block Explorer:
6-Please stake some coins to support the Kore Network. If you are new to Kore PM me for some free coins to stake.
Thanks to: "bearishtrader" "Here is my Ubuntu Linux build of KoreCoin 2.0 staking wallet (no VoIP): Version: 64 bit Ubuntu Linux 14.04 LTS Trusty"!Nk110QaT!yuf_cVCyKtXoJufgi3kJk6VcvsC4r92WP4ZMtnBrbeY
Prerequisites (Needs boost 1.55, Berkeley db4.8++): sudo apt-get update sudo apt-add-repository ppa:bitcoin/bitcoin sudo apt-add-repository ppa:boost-latest/ppa sudo apt-get install unzip qt4-qmake libqt4-dev build-essential libboost1.55-all-dev libssl-dev libdb4.8++-dev libminiupnpc-dev libminiupnpc8 sudo apt-get upgrade
unzip chmod u+x korecoin-qt korecoin-qt
Then exit and replace the .KoreCoin/peers.dat with the one above
Re-launch wallet
NOTE: If you get a virus warning we have researched it as a false positive. You can put it to your antivirus/antimalware exclude list so its not checked. Not one person ever had an issue with malware or a virus using the KORE wallets.
With this unexpected price rise, many are curious what KORE has to offer and what the coin is about.
KORE is a project centered around security in Communications, Computer, Smart Phone and Marketplace interaction and use. There are a few other KORE Projects we cant yet announce. Lets talk a bit on the ones we're able to disclose...
1-Integrated Tor for secure transactions and staking 2-Integrated Tor browser for secure web surfing 3-KOREPBX for secure wallet to wallet and Telecom number calling and video. 4-KOREbay A unique Tor hosted Marketplace 5-Aether Krypton OS - A new Operating System based on Security and Privacy 6-KOREPhone - Our KORE branded phone to debut the AEOS also centered on security and privacy with some unique features. 7-KORE PoBA - Our end goal of the holy grail of anonymous currencies.
KORE is the first coin to integrate Tor into the wallet transactions and staking meaning your IP is not seen. KORE had also been the first coin to integrate a PBX based wallet to wallet calling service. We are presently working on the end goals of including Video Calling, messaging and making it a bit more decentralized and secure with the end goal of having it run through the Tor network. We also want to include the ability to dial regular telecom numbers. This work is in progress and some is undergoing testing.
KORE also is the first coin to work on a multi year project of an Operating system centered around privacy and security called the Aether Krypton OS.
The Operating System is planned to debut on the KOREPhone, another first.
KORE with another first integrated a Tor Browser into the Linux wallet some time ago to debut in the new release. This allows you to surf the web in privacy and security.
KORE was also first to announce the unique KOREbay marketplace which is in development. This service will be unlike many other crypto related marketplaces and have additional hosting on the Tor Network.
Our goal is to take what we have and upgrade anonymous currencies to the next level.
For now these are the projects in various stages of development and testing that we can talk a little bit about. We will not give out any road maps. The releases could start in 2-5 months or 2-5 weeks. This is about giving the growing KORE community and Investors an idea of the perceived value of what we are bringing to the crypto/public as a means of providing alternatives to choose from. There are plenty more KORE Team projects and we could possibly post a few of those once the new wallet is released in the new OP page where dissemination of information will be a little more open. Join the KORE Revolution!
Yours Truly, MikeMike
submitted by Vindyne8 to CryptoCurrency [link] [comments]

[ANN] [BTV] Bitvote -- A Hard Fork of Bitcoin (Keep Updating)

1. Update
2018/1/20 update:The main chain is released. Please use the code in GitHub ( to compile and synchronize data.
2018/1/21 update: COINEX ( Launched BTV/BCH trading pair, deposit and withdraw.
2018/1/22 update: The solution of the mining pool is released in GitHub ( for your reference.
2018/1/26 update: Miner for Windows x64 is released in on our website. For Linux users, please use codes ( to compile, and use your CPU to mine and vote.
2018/1/27 update: The QT Wallet for Windows x64 is released.
2018/1/29 update: Hypex ( ) opened BTV/BTC and BTV/ETH trading pair, and users can deposit and withdraw BTV on Hypex.
2018/2/02 update: Block explorer is released:
2018/2/05 update: BTV integrated into BeeChat (, you can send and receive BTV in BeeChat
2018/2/07 update: Now you can put your BTV in Bitpie. Dowload Bitpie wallet at
2018/2/26 update: Bit-Z will open BTV/BTC and BTV/ETH transaction pairs at 15:00 on March 2, 2018 (GMT+8). BTV withdrawal and deposit will also be opened at the same time.
2. Introduction
Bitvote has forked successfully at Bitcoin block height 505050. Bitvote is a fork of Bitcoin, and its abbreviation is BTV. There will be no pre-mining and additional issuance. Bitvote uses the CryptoNight algorithm.
3. Exchanges
4. Mining Pool
5. Addnode Information
6.Bitvote Technical Features
Bitvote uses CryptoNight algorithm, which responds to Satoshi Nakamoto's vision of one-CPU-one-vote, to balance hashrate distribution, making decentralization a real thing.
Replay Protection
Improved wallet safety and eliminated double hashing problem make complete replay protection come true, which protects users and their tokens from various accidents as well as malicious threats.
Block Size Expansion
The block size is expanded to 8M, and the block also supports SegWit. Transaction speed can be improved greatly, so bitcoin network congestion will be completely solved and its practical values will be added.
Lightning Network
There is no need to trust the other party or the third party to achieve real-time and huge amounts of transactions, and payment channels are introduced to enhance the extensibility.
Smart Contract
With the system that has infinite possibilities and the ability to issue assets and establish applications, Bitvote is a token which integrates values and practicability together.
Block Vote
Bitvote employs the scheme of block mark bidding and voting independently. The development direction of the community will be decided by the voting result; thus an autonomous community can be established and divergences can be solved democratically.
7. Communities
Official Website
WeChat Subscription Account:bitvote
E-mail:([email protected])
8. Whitepaper
For more information about Bitvote, please refer to the whitepaper English version; Chinese version
submitted by bitcoinvote to bitvote_one [link] [comments]

Proof of Nodework (PoNW) - a method to trustlessly reward nodes for storing and verifying the blockchain | John Hardy | Feb 07 2017

John Hardy on Feb 07 2017:
Proof of Nodework (PoNW) is a way to reward individual nodes for keeping a full copy of and verifying the blockchain.
Hopefully they also do useful ‘traditional’ node activities too like relay transactions and blocks, but there isn’t really any way I can think of to trustlessly verify this also.
PoNW would require a new separate area of block space, a nodeblock, purely concerned with administering the system. A nodeblock is committed to a block as with SegWit. A recent history of nodeblocks needs to be stored by nodes, however the data eventually becomes obsolete and so does not need to be retained forever.
In order to prevent Sybil, a node must register an Bitcoin address by submitting an addNode transaction - along with a security deposit to prevent cheating.
This transaction will be stored in the nodeblock. Once a node can see that its addNode transaction has been added it can begin the PoNW process. The node’s registered address will be hashed with the block header of the block it wants to work on. This will determine exactly where within the blockchain to begin the PoNW.
The PoNW method could be as simple as creating a Merkle tree from the randomly generated point on the blockchain, though a method that is CPU/Memory heavy and less likely to be replaced by dedicated hardware like ASICs would be better. This process could not begin until the most recent block has been fully verified, and while being carried out should still enable normal relay activities to proceed as normal, since it shouldn’t tie up network at all. The data processed should also be mixed with data from the latest block so that it cannot be computed in advance.
A node can do as much PoNW for a block as it likes. Once finished it will then create a nodeWorkComplete transaction for that block with its final proof value, add how much ‘work’ it did - and create a couple of assertions about what it processed (such as there were x number of pieces of data matching a particular value during calculating). These assertions can be accurate or inaccurate.
The system will run in epochs. During each epoch of say 2016 blocks, there will be an extended window for PoNW transactions to be added to nodeblocks to limit minor censorship.
The random hash generated from a node’s address and blockhash will also be used to determine nodeWorkComplete transactions from a previous block that the node must also verify, and correctly calculate whether the assertions it made were true or false. The average PoNW that a node performed in its previous x nodeblocks will be used to determine the target PoNW for the node to verify - and this will randomly be a large number of smaller PoNW transactions, or a smaller number of large PoNW. This process will be deterministic based on that block and address hash. All the data will be put together in a transaction and then signed by the node addresses private key.
If a nodeWorkComplete transaction contains any incorrect information in an attempt to cheat the validation process a challenge transaction can be created. This begins a refereeing process where other nodes check the challenge and vote whether it is to be upheld or not. The losing node is punished by losing their accrued PoNW for that epoch and a percentage of their security deposit.
Nodes will also be punished if they broadcast more than one signed transaction per block.
In order to prevent nodes from having multiple keys registered - which would enable them choose to perform PoNW on a subset of the data that they hold - the share of reward that the node gets will be multiplied based on the number of blocks within an epoch that the node performs PoNW on. The share of reward is limited based on how much security deposit has been staked. The higher the PoNW the higher the deposit needed in order to claim their full allocation of any reward.
At the end of an epoch, with a wait period for any delayed or censored transactions or challenges to be included and settled up, the process of calculating the reward each node is due can begin. This will then be then paid in a regular block, and means for all the data involved in PoNW, the only permanent mark it makes on the main blockchain is for a transaction that pays all addresses their share of the reward at the end of epoch. Any miner who creates a block without correctly calculating and paying the due reward will have mined an invalid block and be orphaned.
The question of where and how much the reward comes from is a different one. It could come from the existing miner reward, or a special new tx donation fee for nodes. If there was some way for users to ‘donate’ to the reward pool for nodes this would increase the incentive for additional nodes to participate on the network in the event of centralisation.
This is a relatively effective way to create a reward for all nodes participating on a network. I’d be keen to field any questions or critiques.
John Hardy
john at
-------------- next part --------------
An HTML attachment was scrubbed...
submitted by dev_list_bot to bitcoin_devlist [link] [comments]

[P2pool] How to make your own personal p2pool Node!

Tired of getting no block rewards and sending many dead shares? Need a p2pool node close to your miner? MAKE YOUR OWN! :D
And, Yep, P2pools give 0.5% Rewards to block finders!
Here's some info about p2ools:
The stronger the P2Pool network becomes the more resistant the digibyte network is to 51% attacks!
Oh and, P2pools are DDOS proof! Now that's News! So if your node gets DDOS'd .. you dont lose your shares as the shares have been saved in the p2pool, its called the sharechain. So you get paid anyhow! Thanks to the p2pool network. and you ccan set your workers to another pool using the "--failover only" command in cgminer (if im not wrong) and get it back to work on the p2pool network!
TL;DR; P2POOL = 1 Big fat network Decentrazlized pool!
Install Ubuntu server or Desktop if you want or u can use a VPS (VirtualPrivateServer -- Link Below with coupon code)
So Let's start off in the command line (Open Terminal.. and all you have to do is Cut, Copy Paste! ;) )
Start by updating and upgrading Ubuntu, you know you want the best ;)
sudo apt-get update sudo apt-get upgrade sudo apt-get install python-software-properties sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update 
Time for the DigiByteProject dependencies!
sudo apt-get install build-essential libboost-all-dev libcurl4-openssl-dev libdb5.1-dev libdb5.1++-dev git qt-sdk libminiupnpc-dev sudo apt-get install qrencode libqrencode-dev 
And, Now to compile DigiByte on your system!
git clone git:// digibyte #renaming makes it easier ;) cd ~/digibyte/src mkdir obj make -f makefile.unix USE_UPNP=- sudo cp digibyted /usbin cd ~ 
After it has compiled try running 'digibyted'
If you get an error saying you need to make the digibyte.conf file, good! :) If it doesnt give you that error, make sure you followed the compiling steps appropriately.
So, Lets create the conf file here...
cd .digibyte #edited from 'digibyted' .. fixed!! nano digibyte.conf 
Paste the following, CHANGING THE USERNAME AND PASS!! make sure to take note of both, you'll need these later!
rpcuser=CHANGEusername rpcpassword=ChangePassword daemon=1 server=1 rpcport=14022 port=12024 gen=1 rpcallowip= addnode= addnode= addnode= addnode= addnode= addnode= addnode= addnode= addnode= addnode= addnode= 
Press 'CTRL' + ' X', and then 'Y' to save when prompted
cd ~ ./digibyte/src/digibyted ./digibyte/src/digibyted getinfo 
Make sure you check the latest block in the block chain or on your local DigiByte Wallets. This is to see how far your p2pool node has gotten! This is gonna take quite a while so lets CONTINUE!
Let's get the p2pool software and frontend in! Install the p2pool dependencies!
sudo apt-get install python-zope.interface python-twisted python-twisted-web git clone p2pool #renaming it! cd ~/p2pool/digibyte_subsidy #Thanks to Chaeplin sudo python install 
Time to edit and customise the html code to personalise your p2pool's frontend. Feel free to change the p2pool name and if you're an advanced user, feel free to add your own frontend from git hub after removing the web-static folder. (OPTIONAL: by using rm -f -r web-static #in that directory. And then you can choose whichever frontend you want! by cloning it in the web-static folder)
Editing the current frontend html!
cd .. cd web-static nano index.html 
After personalising the page, i.e. changing the p2pool name and adding some info! Lets go back and check how far the block downloading has gotten! You can check this by typing this in the command line after going back to the root directory:
cd ~ ./digibyte/src/digibyted getinfo 
This is gonna take a while so might as well check for updates again :P
sudo apt-get update sudo apt-get upgrade 
After making sure that all the blocks have been synced locally! We're ready to run the p2pool node! Simply enter the string below in the command line, entering your USERNAME and PASS that you saved earlier!
screen -d -m -S myp2pool ~/p2pool/ --give-author 0 --net digibyte NEWUSER NEWPASS --outgoing-conns 4 
If you want to charge a fee for your node add this to your string, adding your fee address!:
--fee 1.0 --address NEWDGBADDRESS 
To see if the node is up and running enter this in the command line:
screen -x myp2pool 
'CTRL' + 'A' + 'D' to close the terminal if you press 'CTRL' + 'C', it will terminate the p2pool program and you'll have to restart the pool by using the string above!
Once, Everything is setup as planned! Check your p2pool node's ip Address by entering this into the command line:
inet addr: #You'll see a line like this.
So, Your cgminer string should look something like this:
cgminer --scrypt -o -u DGBADDRESS -p x
And your p2pool WEB ADDRESS should look like this:
You can monitor your p2pool using that web address! Enjoy, your personal p2pool node!! :D
If for whatever reason the server shuts off and you need to restart the p2pool node, you should run digibyted again and after it has synced successfully, just type in your p2pool string:
screen -d -m -S myp2pool ~/p2pool/ --give-author 0 --net digibyte NEWUSER NEWPASS --outgoing-conns 4 --fee 1.0 --address NEWADDRESS
PRESS CTRL + A + D to Detach from screen
UPDATE Follow Guide below if you used this guide before DigibByte v2.0 was released (28th Feb 2014)
You must check whether you're on the right ShareChain. Make Sure the block Value says 7960!
This Tutorial was made with the help of an existing Guide: Kudos to crypto49er!
If you want to do this on a VPS:
Here's a link to a VPS hosting site:
Feel free to use my $10 ref. code -- it doesnt really make a difference, though.
Let me know if this guide helped!
submitted by StormMiner to Digibyte [link] [comments]

Bitcoin Core 0.14.1 released | Wladimir J. van der Laan | Apr 22 2017

Wladimir J. van der Laan on Apr 22 2017:
Hash: SHA512
Bitcoin Core version 0.14.1 is now available from:
Or, by torrent:
This is a new minor version release, including various bugfixes and
performance improvements, as well as updated translations.
Please report bugs using the issue tracker at github:
To receive security and update notifications, please subscribe to:

Bitcoin Core is extensively tested on multiple operating systems using
the Linux kernel, macOS 10.8+, and Windows Vista and later.
Microsoft ended support for Windows XP on April 8th, 2014,
No attempt is made to prevent installing or running the software on Windows XP, you
can still do so at your own risk but be aware that there are known instabilities and issues.
Please do not report issues about Windows XP to the issue tracker.
Bitcoin Core should also work on most other Unix-like systems but is not
frequently tested on them.
Notable changes

RPC changes
These interface changes break compatibility with 0.14.0, when the named
arguments functionality, introduced in 0.14.0, is used. Client software
using these calls with named arguments needs to be updated.
In previous versions, getblocktemplate required segwit support from downstream
clients/miners once the feature activated on the network. In this version, it
now supports non-segwit clients even after activation, by removing all segwit
transactions from the returned block template. This allows non-segwit miners to
continue functioning correctly even after segwit has activated.
Due to the limitations in previous versions, getblocktemplate also recommended
non-segwit clients to not signal for the segwit version-bit. Since this is no
longer an issue, getblocktemplate now always recommends signalling segwit for
all miners. This is safe because ability to enforce the rule is the only
required criteria for safe activation, not actually producing segwit-enabled
UTXO memory accounting
Memory usage for the UTXO cache is being calculated more accurately, so that
the configured limit (-dbcache) will be respected when memory usage peaks
during cache flushes. The memory accounting in prior releases is estimated to
only account for half the actual peak utilization.
The default -dbcache has also been changed in this release to 450MiB. Users
who currently set -dbcache to a high value (e.g. to keep the UTXO more fully
cached in memory) should consider increasing this setting in order to achieve
the same cache performance as prior releases. Users on low-memory systems
(such as systems with 1GB or less) should consider specifying a lower value for
this parameter.
Additional information relating to running on low-memory systems can be found
0.14.1 Change log

Detailed release notes follow. This overview includes changes that affect
behavior, not code moves, refactors and string updates. For convenience in locating
the code changes and accompanying discussion, both the pull request and
git merge commit are mentioned.

RPC and other APIs

    • #10084 142fbb2 Rename first named arg of createrawtransaction (MarcoFalke)
    • #10139 f15268d Remove auth cookie on shutdown (practicalswift)
    • #10146 2fea10a Better error handling for submitblock (rawodb, gmaxwell)
    • #10144 d947afc Prioritisetransaction wasn't always updating ancestor fee (sdaftuar)
    • #10204 3c79602 Rename disconnectnode argument (jnewbery)

Block and transaction handling

    • #10126 0b5e162 Compensate for memory peak at flush time (sipa)
    • #9912 fc3d7db Optimize GetWitnessHash() for non-segwit transactions (sdaftuar)
    • #10133 ab864d3 Clean up calculations of pcoinsTip memory usage (morcos)

P2P protocol and network code

    • #9953/#10013 d2548a4 Fix shutdown hang with >= 8 -addnodes set (TheBlueMatt)
    • #10176 30fa231 net: gracefully handle NodeId wrapping (theuni)

Build system

  • - #9973 e9611d1 depends: fix zlib build on osx (theuni)


  • - #10060 ddc2dd1 Ensure an item exists on the rpcconsole stack before adding (achow101)


    • #9955/#10006 569596c Don't require segwit in getblocktemplate for segwit signalling or mining (sdaftuar)
    • #9959/#10127 b5c3440 Prevent slowdown in CreateNewBlock on large mempools (sdaftuar)

Tests and QA

  • - #10157 55f641c Fix the test (sdaftuar)


    • #10037 4d8e660 Trivial: Fix typo in help getrawtransaction RPC (keystrike)
    • #10120 e4c9a90 util: Work around (virtual) memory exhaustion on 32-bit w/ glibc (laanwj)
    • #10130 ecc5232 bitcoin-tx input verification (awemany, jnewbery)

Thanks to everyone who directly contributed to this release:
    • Alex Morcos
    • Andrew Chow
    • Awemany
    • Cory Fields
    • Gregory Maxwell
    • James Evans
    • John Newbery
    • MarcoFalke
    • Matt Corallo
    • Pieter Wuille
    • practicalswift
    • rawodb
    • Suhas Daftuar
    • Wladimir J. van der Laan
As well as everyone that helped translating on Transifex.
Version: GnuPG v1
submitted by dev_list_bot to bitcoin_devlist [link] [comments]

[ANN]SHERLOCK COIN (SHC)| + | + 221 Baker St + | + |only 221 coins to be mined +

SHERLOCK COIN (SHC) - The Game is on to the Crypto World!
Overview As of Sherlock Holmes and as you may know is best detective and genius of all time , while being grateful for the dedication and works of Sir Arthur Canon Doyle , this coin is solely based on character of Sherlock Holmes and ingenuity of the same while solving mysteries the same can be seen on the coin. Wink , while dedicating this coin to all the enthusiasts of Sherlock Holmes , I believe and have faith that this coin will make it through and will be a success , something to hold on to and cherish.
As you probably know by now that the board get's spammed uncontrollably by ALT-Coins releases everyday , some might survive some might not I want SHC to be treasured not at all a pump and dump coin but a coin to cherish the name of Sherlock Holmes and for the enthusiasts to treasure it and if you want to spread it around.
Launch This is a fork of Litecoin and developed using foundations and guidance documented by beloved members here who have committed and pledged their support for cryptocurrencies mainly Bitcoin as well as Alt-coins , my salute is to all who strive to make Cryptocurrencies the future and the dedication of developers who work night and day to make that dream a success , this coin is not a competitor to Bitcoin nor other ALT coins but a strength to the world of Cryptocurrencies and my contribution thus stands and will always with the community , we should never forget the past , thus as they say if done will be void of a future , therefore my salute goes to Bitcoin , it's founders and developers and the community that stands by it and everyone on this forum , thereby paying my respect as we all know we should be thankful of Bitcoin without it we would never would have imagined or known about a world of Cryptocurrencies. Salute!
Please Note: This is NOT a paid up over the countewebsite coin , that just popped out of a script on a website after making a Bitcoin Payment , I had to put my sweat , tears , dedication , sacrifice and time (lot's of it) , had to put 200% of my effort, trial and error , learning , failures to make this workout , this coin opened up a new chapter in my life , learning , as I've learned alot while making this , I kindly ask you to respect that while criticizing if you may require.
WEBSITE (Under Maintenance)
FORUM To Be Announced
SPECIFICATIONS Scrypt 221 coins Max 221 second block time Difficulty re-target every 10 minutes 0.00000010 Block reward for the first 221 blocks (Conveniently set to allow you to get your miners running) Blocks 222+ are 0.00004200 block reward Random Block Rewards/Super Blocks! Smiley Block 212 is a Special Block with More Rewards than the normal block value Tx fees are 0.00000001 RPC port 55883 p2p port 55884 0.01% (0.221 coins) Premine for Testing/Bounty and Giveaway Purposes.
Source Code
Windows Wallet
Sample sherlockcoin.conf file:
rpcuser=username rpcpassword=password rpcallowip= rpcport=55883 port=55884 listen=1 daemon=1 server=1 addnode=
POOLS To be Announced
EXCHANGES To be Announced
SERVICES / OTHER To be Announced
IRC FreeNode To be Announced
For more services it's best to check out the website links at the top of this information thread.
Elementary my dear alt-coiner! Wink These coins will be rare! Smiley
submitted by soopy452000 to SherlockCoin [link] [comments]

Bitcoin Core 0.10.0 released | Wladimir | Feb 16 2015

Wladimir on Feb 16 2015:
Bitcoin Core version 0.10.0 is now available from:
This is a new major version release, bringing both new features and
bug fixes.
Please report bugs using the issue tracker at github:
The whole distribution is also available as torrent:
Upgrading and downgrading

How to Upgrade
If you are running an older version, shut it down. Wait until it has completely
shut down (which might take a few minutes for older versions), then run the
installer (on Windows) or just copy over /Applications/Bitcoin-Qt (on Mac) or
bitcoind/bitcoin-qt (on Linux).
Downgrading warning
Because release 0.10.0 makes use of headers-first synchronization and parallel
block download (see further), the block files and databases are not
backwards-compatible with older versions of Bitcoin Core or other software:
  • Blocks will be stored on disk out of order (in the order they are
received, really), which makes it incompatible with some tools or
other programs. Reindexing using earlier versions will also not work
anymore as a result of this.
  • The block index database will now hold headers for which no block is
stored on disk, which earlier versions won't support.
If you want to be able to downgrade smoothly, make a backup of your entire data
directory. Without this your node will need start syncing (or importing from
bootstrap.dat) anew afterwards. It is possible that the data from a completely
synchronised 0.10 node may be usable in older versions as-is, but this is not
supported and may break as soon as the older version attempts to reindex.
This does not affect wallet forward or backward compatibility.
Notable changes

Faster synchronization
Bitcoin Core now uses 'headers-first synchronization'. This means that we first
ask peers for block headers (a total of 27 megabytes, as of December 2014) and
validate those. In a second stage, when the headers have been discovered, we
download the blocks. However, as we already know about the whole chain in
advance, the blocks can be downloaded in parallel from all available peers.
In practice, this means a much faster and more robust synchronization. On
recent hardware with a decent network link, it can be as little as 3 hours
for an initial full synchronization. You may notice a slower progress in the
very first few minutes, when headers are still being fetched and verified, but
it should gain speed afterwards.
A few RPCs were added/updated as a result of this:
  • getblockchaininfo now returns the number of validated headers in addition to
the number of validated blocks.
  • getpeerinfo lists both the number of blocks and headers we know we have in
common with each peer. While synchronizing, the heights of the blocks that we
have requested from peers (but haven't received yet) are also listed as
  • A new RPC getchaintips lists all known branches of the block chain,
including those we only have headers for.
Transaction fee changes
This release automatically estimates how high a transaction fee (or how
high a priority) transactions require to be confirmed quickly. The default
settings will create transactions that confirm quickly; see the new
'txconfirmtarget' setting to control the tradeoff between fees and
confirmation times. Fees are added by default unless the 'sendfreetransactions'
setting is enabled.
Prior releases used hard-coded fees (and priorities), and would
sometimes create transactions that took a very long time to confirm.
Statistics used to estimate fees and priorities are saved in the
data directory in the fee_estimates.dat file just before
program shutdown, and are read in at startup.
New command line options for transaction fee changes:
  • -txconfirmtarget=n : create transactions that have enough fees (or priority)
so they are likely to begin confirmation within n blocks (default: 1). This setting
is over-ridden by the -paytxfee option.
  • -sendfreetransactions : Send transactions as zero-fee transactions if possible
(default: 0)
New RPC commands for fee estimation:
  • estimatefee nblocks : Returns approximate fee-per-1,000-bytes needed for
a transaction to begin confirmation within nblocks. Returns -1 if not enough
transactions have been observed to compute a good estimate.
  • estimatepriority nblocks : Returns approximate priority needed for
a zero-fee transaction to begin confirmation within nblocks. Returns -1 if not
enough free transactions have been observed to compute a good
RPC access control changes
Subnet matching for the purpose of access control is now done
by matching the binary network address, instead of with string wildcard matching.
For the user this means that -rpcallowip takes a subnet specification, which can be
  • a single IP address (e.g. or fe80::0012:3456:789a:bcde)
  • a network/CIDR (e.g. or fe80::0000/64)
  • a network/netmask (e.g. or fe80::0012:3456:789a:bcde/ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff)
An arbitrary number of -rpcallow arguments can be given. An incoming connection will be accepted if its origin address
matches one of them.
For example:
| 0.9.x and before | 0.10.x |
| -rpcallowip= | -rpcallowip= (unchanged) |
| -rpcallowip=192.168.1.* | -rpcallowip= |
| -rpcallowip=192.168.* | -rpcallowip= |
| -rpcallowip=* (dangerous!) | -rpcallowip=::/0 (still dangerous!) |
Using wildcards will result in the rule being rejected with the following error in debug.log:
 Error: Invalid -rpcallowip subnet specification: *. Valid are a single IP (e.g., a network/netmask (e.g. or a network/CIDR (e.g. 
REST interface
A new HTTP API is exposed when running with the -rest flag, which allows
unauthenticated access to public node data.
It is served on the same port as RPC, but does not need a password, and uses
plain HTTP instead of JSON-RPC.
Assuming a local RPC server running on port 8332, it is possible to request:
In every case, EXT can be bin (for raw binary data), hex (for hex-encoded
binary) or json.
For more details, see the doc/ document in the repository.
RPC Server "Warm-Up" Mode
The RPC server is started earlier now, before most of the expensive
intialisations like loading the block index. It is available now almost
immediately after starting the process. However, until all initialisations
are done, it always returns an immediate error with code -28 to all calls.
This new behaviour can be useful for clients to know that a server is already
started and will be available soon (for instance, so that they do not
have to start it themselves).
Improved signing security
For 0.10 the security of signing against unusual attacks has been
improved by making the signatures constant time and deterministic.
This change is a result of switching signing to use libsecp256k1
instead of OpenSSL. Libsecp256k1 is a cryptographic library
optimized for the curve Bitcoin uses which was created by Bitcoin
Core developer Pieter Wuille.
There exist attacks[1] against most ECC implementations where an
attacker on shared virtual machine hardware could extract a private
key if they could cause a target to sign using the same key hundreds
of times. While using shared hosts and reusing keys are inadvisable
for other reasons, it's a better practice to avoid the exposure.
OpenSSL has code in their source repository for derandomization
and reduction in timing leaks that we've eagerly wanted to use for a
long time, but this functionality has still not made its
way into a released version of OpenSSL. Libsecp256k1 achieves
significantly stronger protection: As far as we're aware this is
the only deployed implementation of constant time signing for
the curve Bitcoin uses and we have reason to believe that
libsecp256k1 is better tested and more thoroughly reviewed
than the implementation in OpenSSL.
Watch-only wallet support
The wallet can now track transactions to and from wallets for which you know
all addresses (or scripts), even without the private keys.
This can be used to track payments without needing the private keys online on a
possibly vulnerable system. In addition, it can help for (manual) construction
of multisig transactions where you are only one of the signers.
One new RPC, importaddress, is added which functions similarly to
importprivkey, but instead takes an address or script (in hexadecimal) as
argument. After using it, outputs credited to this address or script are
considered to be received, and transactions consuming these outputs will be
considered to be sent.
The following RPCs have optional support for watch-only:
getbalance, listreceivedbyaddress, listreceivedbyaccount,
listtransactions, listaccounts, listsinceblock, gettransaction. See the
RPC documentation for those methods for more information.
Compared to using getrawtransaction, this mechanism does not require
-txindex, scales better, integrates better with the wallet, and is compatible
with future block chain pruning functionality. It does mean that all relevant
addresses need to added to the wallet before the payment, though.
Consensus library
Starting from 0.10.0, the Bitcoin Core distribution includes a consensus library.
The purpose of this library is to make the verification functionality that is
critical to Bitcoin's consensus available to other applications, e.g. to language
bindings such as [python-bitcoinlib]( or
alternative node implementations.
This library is called (or, .dll for Windows).
Its interface is defined in the C header [bitcoinconsensus.h](
In its initial version the API includes two functions:
  • bitcoinconsensus_verify_script verifies a script. It returns whether the indicated input of the provided serialized transaction
correctly spends the passed scriptPubKey under additional constraints indicated by flags
  • bitcoinconsensus_version returns the API version, currently at an experimental 0
The functionality is planned to be extended to e.g. UTXO management in upcoming releases, but the interface
for existing methods should remain stable.
Standard script rules relaxed for P2SH addresses
The IsStandard() rules have been almost completely removed for P2SH
redemption scripts, allowing applications to make use of any valid
script type, such as "n-of-m OR y", hash-locked oracle addresses, etc.
While the Bitcoin protocol has always supported these types of script,
actually using them on mainnet has been previously inconvenient as
standard Bitcoin Core nodes wouldn't relay them to miners, nor would
most miners include them in blocks they mined.
It has been observed that many of the RPC functions offered by bitcoind are
"pure functions", and operate independently of the bitcoind wallet. This
included many of the RPC "raw transaction" API functions, such as
bitcoin-tx is a newly introduced command line utility designed to enable easy
manipulation of bitcoin transactions. A summary of its operation may be
obtained via "bitcoin-tx --help" Transactions may be created or signed in a
manner similar to the RPC raw tx API. Transactions may be updated, deleting
inputs or outputs, or appending new inputs and outputs. Custom scripts may be
easily composed using a simple text notation, borrowed from the bitcoin test
This tool may be used for experimenting with new transaction types, signing
multi-party transactions, and many other uses. Long term, the goal is to
deprecate and remove "pure function" RPC API calls, as those do not require a
server round-trip to execute.
Other utilities "bitcoin-key" and "bitcoin-script" have been proposed, making
key and script operations easily accessible via command line.
Mining and relay policy enhancements
Bitcoin Core's block templates are now for version 3 blocks only, and any mining
software relying on its getblocktemplate must be updated in parallel to use
libblkmaker either version 0.4.2 or any version from 0.5.1 onward.
If you are solo mining, this will affect you the moment you upgrade Bitcoin
Core, which must be done prior to BIP66 achieving its 951/1001 status.
If you are mining with the stratum mining protocol: this does not affect you.
If you are mining with the getblocktemplate protocol to a pool: this will affect
you at the pool operator's discretion, which must be no later than BIP66
achieving its 951/1001 status.
The prioritisetransaction RPC method has been added to enable miners to
manipulate the priority of transactions on an individual basis.
Bitcoin Core now supports BIP 22 long polling, so mining software can be
notified immediately of new templates rather than having to poll periodically.
Support for BIP 23 block proposals is now available in Bitcoin Core's
getblocktemplate method. This enables miners to check the basic validity of
their next block before expending work on it, reducing risks of accidental
hardforks or mining invalid blocks.
Two new options to control mining policy:
  • -datacarrier=0/1 : Relay and mine "data carrier" (OP_RETURN) transactions
if this is 1.
  • -datacarriersize=n : Maximum size, in bytes, we consider acceptable for
"data carrier" outputs.
The relay policy has changed to more properly implement the desired behavior of not
relaying free (or very low fee) transactions unless they have a priority above the
AllowFreeThreshold(), in which case they are relayed subject to the rate limiter.
BIP 66: strict DER encoding for signatures
Bitcoin Core 0.10 implements BIP 66, which introduces block version 3, and a new
consensus rule, which prohibits non-DER signatures. Such transactions have been
non-standard since Bitcoin v0.8.0 (released in February 2013), but were
technically still permitted inside blocks.
This change breaks the dependency on OpenSSL's signature parsing, and is
required if implementations would want to remove all of OpenSSL from the
consensus code.
The same miner-voting mechanism as in BIP 34 is used: when 751 out of a
sequence of 1001 blocks have version number 3 or higher, the new consensus
rule becomes active for those blocks. When 951 out of a sequence of 1001
blocks have version number 3 or higher, it becomes mandatory for all blocks.
Backward compatibility with current mining software is NOT provided, thus miners
should read the first paragraph of "Mining and relay policy enhancements" above.
0.10.0 Change log

Detailed release notes follow. This overview includes changes that affect external
behavior, not code moves, refactors or string updates.
  • f923c07 Support IPv6 lookup in bitcoin-cli even when IPv6 only bound on localhost
  • b641c9c Fix addnode "onetry": Connect with OpenNetworkConnection
  • 171ca77 estimatefee / estimatepriority RPC methods
  • b750cf1 Remove cli functionality from bitcoind
  • f6984e8 Add "chain" to getmininginfo, improve help in getblockchaininfo
  • 99ddc6c Add nLocalServices info to RPC getinfo
  • cf0c47b Remove getwork() RPC call
  • 2a72d45 prioritisetransaction
  • e44fea5 Add an option -datacarrier to allow users to disable relaying/mining data carrier transactions
  • 2ec5a3d Prevent easy RPC memory exhaustion attack
  • d4640d7 Added argument to getbalance to include watchonly addresses and fixed errors in balance calculation
  • 83f3543 Added argument to listaccounts to include watchonly addresses
  • 952877e Showing 'involvesWatchonly' property for transactions returned by 'listtransactions' and 'listsinceblock'. It is only appended when the transaction involves a watchonly address
  • d7d5d23 Added argument to listtransactions and listsinceblock to include watchonly addresses
  • f87ba3d added includeWatchonly argument to 'gettransaction' because it affects balance calculation
  • 0fa2f88 added includedWatchonly argument to listreceivedbyaddress/...account
  • 6c37f7f getrawchangeaddress: fail when keypool exhausted and wallet locked
  • ff6a7af getblocktemplate: longpolling support
  • c4a321f Add peerid to getpeerinfo to allow correlation with the logs
  • 1b4568c Add vout to ListTransactions output
  • b33bd7a Implement "getchaintips" RPC command to monitor blockchain forks
  • 733177e Remove size limit in RPC client, keep it in server
  • 6b5b7cb Categorize rpc help overview
  • 6f2c26a Closely track mempool byte total. Add "getmempoolinfo" RPC
  • aa82795 Add detailed network info to getnetworkinfo RPC
  • 01094bd Don't reveal whether password is <20 or >20 characters in RPC
  • 57153d4 rpc: Compute number of confirmations of a block from block height
  • ff36cbe getnetworkinfo: export local node's client sub-version string
  • d14d7de SanitizeString: allow '(' and ')'
  • 31d6390 Fixed setaccount accepting foreign address
  • b5ec5fe update getnetworkinfo help with subversion
  • ad6e601 RPC additions after headers-first
  • 33dfbf5 rpc: Fix leveldb iterator leak, and flush before gettxoutsetinfo
  • 2aa6329 Enable customising node policy for datacarrier data size with a -datacarriersize option
  • f877aaa submitblock: Use a temporary CValidationState to determine accurately the outcome of ProcessBlock
  • e69a587 submitblock: Support for returning specific rejection reasons
  • af82884 Add "warmup mode" for RPC server
  • e2655e0 Add unauthenticated HTTP REST interface to public blockchain data
  • 683dc40 Disable SSLv3 (in favor of TLS) for the RPC client and server
  • 44b4c0d signrawtransaction: validate private key
  • 9765a50 Implement BIP 23 Block Proposal
  • f9de17e Add warning comment to getinfo
Command-line options:
  • ee21912 Use netmasks instead of wildcards for IP address matching
  • deb3572 Add -rpcbind option to allow binding RPC port on a specific interface
  • 96b733e Add -version option to get just the version
  • 1569353 Add -stopafterblockimport option
  • 77cbd46 Let -zapwallettxes recover transaction meta data
  • 1c750db remove -tor compatibility code (only allow -onion)
  • 4aaa017 rework help messages for fee-related options
  • 4278b1d Clarify error message when invalid -rpcallowip
  • 6b407e4 -datadir is now allowed in config files
  • bdd5b58 Add option -sysperms to disable 077 umask (create new files with system default umask)
  • cbe39a3 Add "bitcoin-tx" command line utility and supporting modules
  • dbca89b Trigger -alertnotify if network is upgrading without you
  • ad96e7c Make -reindex cope with out-of-order blocks
  • 16d5194 Skip reindexed blocks individually
  • ec01243 --tracerpc option for regression tests
  • f654f00 Change -genproclimit default to 1
  • 3c77714 Make -proxy set all network types, avoiding a connect leak
  • 57be955 Remove -printblock, -printblocktree, and -printblockindex
  • ad3d208 remove -maxorphanblocks config parameter since it is no longer functional
Block and transaction handling:
  • 7a0e84d ProcessGetData(): abort if a block file is missing from disk
  • 8c93bf4 LoadBlockIndexDB(): Require block db reindex if any blk*.dat files are missing
  • 77339e5 Get rid of the static chainMostWork (optimization)
  • 4e0eed8 Allow ActivateBestChain to release its lock on cs_main
  • 18e7216 Push cs_mains down in ProcessBlock
  • fa126ef Avoid undefined behavior using CFlatData in CScript serialization
  • 7f3b4e9 Relax IsStandard rules for pay-to-script-hash transactions
  • c9a0918 Add a skiplist to the CBlockIndex structure
  • bc42503 Use unordered_map for CCoinsViewCache with salted hash (optimization)
  • d4d3fbd Do not flush the cache after every block outside of IBD (optimization)
  • ad08d0b Bugfix: make CCoinsViewMemPool support pruned entries in underlying cache
  • 5734d4d Only remove actualy failed blocks from setBlockIndexValid
  • d70bc52 Rework block processing benchmark code
  • 714a3e6 Only keep setBlockIndexValid entries that are possible improvements
  • ea100c7 Reduce maximum coinscache size during verification (reduce memory usage)
  • 4fad8e6 Reject transactions with excessive numbers of sigops
  • b0875eb Allow BatchWrite to destroy its input, reducing copying (optimization)
  • 92bb6f2 Bypass reloading blocks from disk (optimization)
  • 2e28031 Perform CVerifyDB on pcoinsdbview instead of pcoinsTip (reduce memory usage)
  • ab15b2e Avoid copying undo data (optimization)
  • 341735e Headers-first synchronization
  • afc32c5 Fix rebuild-chainstate feature and improve its performance
  • e11b2ce Fix large reorgs
  • ed6d1a2 Keep information about all block files in memory
  • a48f2d6 Abstract context-dependent block checking from acceptance
  • 7e615f5 Fixed mempool sync after sending a transaction
  • 51ce901 Improve chainstate/blockindex disk writing policy
  • a206950 Introduce separate flushing modes
  • 9ec75c5 Add a locking mechanism to IsInitialBlockDownload to ensure it never goes from false to true
  • 868d041 Remove coinbase-dependant transactions during reorg
  • 723d12c Remove txn which are invalidated by coinbase maturity during reorg
  • 0cb8763 Check against MANDATORY flags prior to accepting to mempool
  • 8446262 Reject headers that build on an invalid parent
  • 008138c Bugfix: only track UTXO modification after lookup
P2P protocol and network code:
  • f80cffa Do not trigger a DoS ban if SCRIPT_VERIFY_NULLDUMMY fails
  • c30329a Add testnet DNS seed of Alex Kotenko
  • 45a4baf Add testnet DNS seed of Andreas Schildbach
  • f1920e8 Ping automatically every 2 minutes (unconditionally)
  • 806fd19 Allocate receive buffers in on the fly
  • 6ecf3ed Display unknown commands received
  • aa81564 Track peers' available blocks
  • caf6150 Use async name resolving to improve net thread responsiveness
  • 9f4da19 Use pong receive time rather than processing time
  • 0127a9b remove SOCKS4 support from core and GUI, use SOCKS5
  • 40f5cb8 Send rejects and apply DoS scoring for errors in direct block validation
  • dc942e6 Introduce whitelisted peers
  • c994d2e prevent SOCKET leak in BindListenPort()
  • a60120e Add built-in seeds for .onion
  • 60dc8e4 Allow -onlynet=onion to be used
  • 3a56de7 addrman: Do not propagate obviously poor addresses onto the network
  • 6050ab6 netbase: Make SOCKS5 negotiation interruptible
  • 604ee2a Remove tx from AlreadyAskedFor list once we receive it, not when we process it
  • efad808 Avoid reject message feedback loops
  • 71697f9 Separate protocol versioning from clientversion
  • 20a5f61 Don't relay alerts to peers before version negotiation
  • b4ee0bd Introduce preferred download peers
  • 845c86d Do not use third party services for IP detection
  • 12a49ca Limit the number of new addressses to accumulate
  • 35e408f Regard connection failures as attempt for addrman
  • a3a7317 Introduce 10 minute block download timeout
  • 3022e7d Require sufficent priority for relay of free transactions
  • 58fda4d Update seed IPs, based on crawler data
  • 18021d0 Remove from dnsseeds.
  • 6fd7ef2 Also switch the (unused) verification code to low-s instead of even-s
  • 584a358 Do merkle root and txid duplicates check simultaneously
  • 217a5c9 When transaction outputs exceed inputs, show the offending amounts so as to aid debugging
  • f74fc9b Print input index when signature validation fails, to aid debugging
  • 6fd59ee script.h: set_vch() should shift a >32 bit value
  • d752ba8 Add SCRIPT_VERIFY_SIGPUSHONLY (BIP62 rule 2) (test only)
  • 698c6ab Add SCRIPT_VERIFY_MINIMALDATA (BIP62 rules 3 and 4) (test only)
  • ab9edbd script: create sane error return codes for script validation and remove logging
  • 219a147 script: check ScriptError values in script tests
  • 0391423 Discourage NOPs reserved for soft-fork upgrades
  • 98b135f Make STRICTENC invalid pubkeys fail the script rather than the opcode
  • 307f7d4 Report script evaluation failures in log and reject messages
  • ace39db consensus: guard against openssl's new strict DER checks
  • 12b7c44 Improve robustness of DER recoding code
  • 76ce5c8 fail immediately on an empty signature
Build system:
  • f25e3ad Fix build in OS X 10.9
  • 65e8ba4 build: Switch to non-recursive make
  • 460b32d build: fix broken boost chrono check on some platforms
  • 9ce0774 build: Fix windows configure when using --with-qt-libdir
  • ea96475 build: Add mention of --disable-wallet to bdb48 error messages
  • 1dec09b depends: add shared dependency builder
  • c101c76 build: Add --with-utils (bitcoin-cli and bitcoin-tx, default=yes). Help string consistency tweaks. Target sanity check fix
  • e432a5f build: add option for reducing exports (v2)
  • 6134b43 Fixing condition 'sabotaging' MSVC build
  • af0bd5e osx: fix signing to make Gatekeeper happy (again)
  • a7d1f03 build: fix dynamic boost check when --with-boost= is used
  • d5fd094 build: fix qt test build when libprotobuf is in a non-standard path
  • 2cf5f16 Add libbitcoinconsensus library
  • 914868a build: add a deterministic dmg signer
  • 2d375fe depends: bump openssl to 1.0.1k
  • b7a4ecc Build: Only check for boost when building code that requires it
  • b33d1f5 Use fee/priority estimates in wallet CreateTransaction
  • 4b7b1bb Sanity checks for estimates
  • c898846 Add support for watch-only addresses
  • d5087d1 Use script matching rather than destination matching for watch-only
  • d88af56 Fee fixes
  • a35b55b Dont run full check every time we decrypt wallet
  • 3a7c348 Fix make_change to not create half-satoshis
  • f606bb9 fix a possible memory leak in CWalletDB::Recover
  • 870da77 fix possible memory leaks in CWallet::EncryptWallet
  • ccca27a Watch-only fixes
  • 9b1627d [Wallet] Reduce minTxFee for transaction creation to 1000 satoshis
  • a53fd41 Deterministic signing
  • 15ad0b5 Apply AreSane() checks to the fees from the network
  • 11855c1 Enforce minRelayTxFee on wallet created tx and add a maxtxfee option
  • c21c74b osx: Fix missing dock menu with qt5
  • b90711c Fix Transaction details shows wrong To:
  • 516053c Make links in 'About Bitcoin Core' clickable
  • bdc83e8 Ensure payment request network matches client network
  • 65f78a1 Add GUI view of peer information
  • 06a91d9 VerifyDB progress reporting
  • fe6bff2 Add BerkeleyDB version info to RPCConsole
  • b917555 PeerTableModel: Fix potential deadlock. #4296
  • dff0e3b Improve rpc console history behavior
  • 95a9383 Remove CENT-fee-rule from coin control completely
  • 56b07d2 Allow setting listen via GUI
  • d95ba75 Log messages with type>QtDebugMsg as non-debug
  • 8969828 New status bar Unit Display Control and related changes
  • 674c070 seed OpenSSL PNRG with Windows event data
  • 509f926 Payment request parsing on startup now only changes network if a valid network name is specified
  • acd432b Prevent balloon-spam after rescan
  • 7007402 Implement SI-style (thin space) thoudands separator
  • 91cce17 Use fixed-point arithmetic in amount spinbox
  • bdba2dd Remove an obscure option no-one cares about
  • bd0aa10 Replace the temporary file hack currently used to change Bitcoin-Qt's dock icon (OS X) with a buffer-based solution
  • 94e1b9e Re-work overviewpage UI
  • 8bfdc9a Better looking trayicon
  • b197bf3 disable tray interactions when client model set to 0
  • 1c5f0af Add column Watch-only to transactions list
  • 21f139b Fix tablet crash. closes #4854
  • e84843c Broken addresses on command line no longer trigger testnet
  • a49f11d Change splash screen to normal window
  • 1f9be98 Disable App Nap on OSX 10.9+
  • 27c3e91 Add proxy to options overridden if necessary
  • 4bd1185 Allow "emergency" shutdown during startup
  • d52f072 Don't show wallet options in the preferences menu when running with -disablewallet
  • 6093aa1 Qt: QProgressBar CPU-Issue workaround
  • 0ed9675 [Wallet] Add global boolean whether to send free transactions (default=true)
  • ed3e5e4 [Wallet] Add global boolean whether to pay at least the custom fee (default=true)
  • e7876b2 [Wallet] Prevent user from paying a non-sense fee
  • c1c9d5b Add Smartfee to GUI
  • e0a25c5 Make askpassphrase dialog behave more sanely
  • 94b362d On close of splashscreen interrupt verifyDB
  • b790d13 English translation update
  • 8543b0d Correct tooltip on address book page
  • b41e594 Fix script test handling of empty scripts
  • d3a33fc Test CHECKMULTISIG with m == 0 and n == 0
  • 29c1749 Let tx (in)valid tests use any SCRIPT_VERIFY flag
  • 6380180 Add rejection of non-null CHECKMULTISIG dummy values
  • 21bf3d2 Add tests for BoostAsioToCNetAddr
  • b5ad5e7 Add Python test for -rpcbind and -rpcallowip
  • 9ec0306 Add CODESEPARATOFindAndDelete() tests
  • 75ebced Added many rpc wallet tests
  • 0193fb8 Allow multiple regression tests to run at once
  • 92a6220 Hook up sanity checks
  • 3820e01 Extend and move all crypto tests to crypto_tests.cpp
  • 3f9a019 added list/get received by address/ account tests
  • a90689f Remove timing-based signature cache unit test
  • 236982c Add skiplist unit tests
  • f4b00be Add CChain::GetLocator() unit test
  • b45a6e8 Add test for getblocktemplate longpolling
  • cdf305e Set -discover=0 in regtest framework
  • ed02282 additional test for OP_SIZE in script_valid.json
  • 0072d98 script tests: BOOLAND, BOOLOR decode to integer
  • 833ff16 script tests: values that overflow to 0 are true
  • 4cac5db script tests: value with trailing 0x00 is true
  • 89101c6 script test: test case for 5-byte bools
  • d2d9dc0 script tests: add tests for CHECKMULTISIG limits
  • d789386 Add "it works" test for bitcoin-tx
  • df4d61e Add bitcoin-tx tests
  • aa41ac2 Test IsPushOnly() with invalid push
  • 6022b5d Make script_{valid,invalid}.json validation flags configurable
  • 8138cbe Add automatic script test generation, and actual checksig tests
  • ed27e53 Add coins_tests with a large randomized CCoinViewCache test
  • 9df9cf5 Make SCRIPT_VERIFY_STRICTENC compatible with BIP62
  • dcb9846 Extend getchaintips RPC test
  • 554147a Ensure MINIMALDATA invalid tests can only fail one way
  • dfeec18 Test every numeric-accepting opcode for correct handling of the numeric minimal encoding rule
  • 2b62e17 Clearly separate PUSHDATA and numeric argument MINIMALDATA tests
  • 16d78bd Add valid invert of invalid every numeric opcode tests
  • f635269 tests: enable alertnotify test for Windows
  • 7a41614 tests: allow rpc-tests to get filenames for bitcoind and bitcoin-cli from the environment
  • 5122ea7 tests: fix on windows
  • fa7f8cd tests: remove old pull-tester scripts
  • 7667850 tests: replace the old (unused since Travis) tests with new rpc test scripts
  • f4e0aef Do signature-s negation inside the tests
  • 1837987 Optimize -regtest setgenerate block generation
  • 2db4c8a Fix node ranges in the test framework
  • a8b2ce5 regression test only setmocktime RPC call
  • daf03e7 RPC tests: create initial chain with specific timestamps
  • 8656dbb Port/fix regression test
  • ca81587 Test the exact order of CHECKMULTISIG sig/pubkey evaluation
  • 7357893 Prioritize and display -testsafemode status in UI
  • f321d6b Add key generation/verification to ECC sanity check
  • 132ea9b miner_tests: Disable checkpoints so they don't fail the subsidy-change test
  • bc6cb41 QA RPC tests: Add tests block block proposals
  • f67a9ce Use deterministically generated script tests
  • 11d7a7d [RPC] add rpc-test for http keep-alive (persistent connections)
  • 34318d7 RPC-test based on invalidateblock for mempool coinbase spends
  • 76ec867 Use actually valid transactions for script tests
  • c8589bf Add actual signature tests
  • e2677d7 Fix smartfees test for change to relay policy
  • 263b65e tests: run sanity checks in tests too
  • 122549f Fix incorrect checkpoint data for testnet3
  • 5bd02cf Log used config file to debug.log on startup
  • 68ba85f Updated Debian example bitcoin.conf with config from wiki + removed some cruft and updated comments
  • e5ee8f0 Remove -beta suffix
  • 38405ac Add comment regarding experimental-use service bits
  • be873f6 Issue warning if collecting RandSeed data failed
  • 8ae973c Allocate more space if necessary in RandSeedAddPerfMon
  • 675bcd5 Correct comment for 15-of-15 p2sh script size
  • fda3fed libsecp256k1 integration
  • 2e36866 Show nodeid instead of addresses in log (for anonymity) unless otherwise requested
  • cd01a5e Enable paranoid corruption checks in LevelDB >= 1.16
  • 9365937 Add comment about never updating nTimeOffset past 199 samples
  • 403c1bf contrib: remove getwork-based pyminer (as getwork API call has been removed)
  • 0c3e101 contrib: Added systemd .service file in order to help distributions integrate bitcoind
  • 0a0878d doc: Add new DNSseed policy
  • 2887bff Update coding style and add .clang-format
  • 5cbda4f Changed LevelDB cursors to use scoped pointers to ensure destruction when going out of scope
  • b4a72a7 contrib/linearize: split output files based on new-timestamp-year or max-file-size
  • e982b57 Use explicit fflush() instead of setvbuf()
  • 234bfbf contrib: Add init scripts and docs for Upstart and OpenRC
  • 01c2807 Add warning about the merkle-tree algorithm duplicate txid flaw
  • d6712db Also create pid file in non-daemon mode
  • 772ab0e contrib: use batched JSON-RPC in linarize-hashes (optimization)
  • 7ab4358 Update bash-completion for v0.10
  • 6e6a36c contrib: show pull # in prompt for github-merge script
  • 5b9f842 Upgrade leveldb to 1.18, make chainstate databases compatible between ARM and x86 (issue #2293)
  • 4e7c219 Catch UTXO set read errors and shutdown
  • 867c600 Catch LevelDB errors during flush
  • 06ca065 Fix CScriptID(const CScript& in) in empty script case

Thanks to everyone who contributed to this release:
  • 21E14
  • Adam Weiss
  • Aitor Pazos
  • Alexander Jeng
  • Alex Morcos
  • Alon Muroch
  • Andreas Schildbach
  • Andrew Poelstra
  • Andy Alness
  • Ashley Holman
  • Benedict Chan
  • Ben Holden-Crowther
  • Bryan Bishop
  • BtcDrak
  • Christian von Roques
  • Clinton Christian
  • Cory Fields
  • Cozz Lovan
  • daniel
  • Daniel Kraft
  • David Hill
  • Derek701
  • dexX7
  • dllud
  • Dominyk Tiller
  • Doug
  • elichai
  • elkingtowa
  • ENikS
  • Eric Shaw
  • Federico Bond
  • Francis GASCHET
  • Gavin Andresen
  • Giuseppe Mazzotta
  • Glenn Willen
  • Gregory Maxwell
  • gubatron
  • HarryWu
  • himynameismartin
  • Huang Le
  • Ian Carroll
  • imharrywu
  • Jameson Lopp
  • Janusz Lenar
  • JaSK
  • Jeff Garzik
  • JL2035
  • Johnathan Corgan
  • Jonas Schnelli
  • jtimon
  • Julian Haight
  • Kamil Domanski
  • kazcw
  • kevin
  • kiwigb
  • Kosta Zertsekel
  • LongShao007
  • Luke Dashjr
  • Mark Friedenbach
  • Mathy Vanvoorden
  • Matt Corallo
  • Matthew Bogosian
  • Micha
  • Michael Ford
  • Mike Hearn
  • mrbandrews
  • mruddy
  • ntrgn
  • Otto Allmendinger
  • paveljanik
  • Pavel Vasin
  • Peter Todd
  • phantomcircuit
  • Philip Kaufmann
  • Pieter Wuille
  • pryds
  • randy-waterhouse
  • R E Broadley
  • Rose Toomey
  • Ross Nicoll
  • Roy Badami
  • Ruben Dario Ponticelli
  • Rune K. Svendsen
  • Ryan X. Charles
  • Saivann
  • sandakersmann
  • SergioDemianLerner
  • shshshsh
  • sinetek
  • Stuart Cardall
  • Suhas Daftuar
  • Tawanda Kembo
  • Teran McKinney
  • tm314159
  • Tom Harding
  • Trevin Hofmann
  • Whit J
  • Wladimir J. van der Laan
  • Yoichi Hirai
  • Zak Wilcox
As well as everyone that helped translating on [Transifex](
Also lots of thanks to the website team David A. Harding and Saivann Carignan.
submitted by bitcoin-devlist-bot to bitcoin_devlist [link] [comments]

Dapscoin - Masternode ADDING NODES TO DEV WALLET FOR FASTER SYNCING 02 - myNode series - Which node to run and Introduction to myNodeBTC Bitcoin Q&A: Honest nodes and consensus 15. Bitcoin over Tor

bitcoin deamon = core value of the software (bitcoind -printtoconsole -debug=1) Bitcoind provide the RPC "interface" in which user can query with bitcoin-cli (or a library in c++). You must run bitcoind before using bitcoin-cli. Basically bitcoin-cli communicate with user’s node bitcoind so in other word your current blockchain state. bitcoind -addnode=$(dig +short IP Transactions. Bitcoin Core versions prior to 0.8.0 also could send IP Transactions to these nodes. If you included your bitcoin address in the "message" field, you might have had your coins back. Tor network. To use Bitcoin-Qt over Tor hidden services, in a terminal/console enter: bitcoin-qt -proxy= -onlynet=tor To use Bitcoin with ... About NavCoin. NavCoin price today is $0.132356 USD with a 24-hour trading volume of $114,361 USD. NavCoin is down 1.31% in the last 24 hours. The current CoinMarketCap ranking is #536, with a market cap of $9,268,156 USD. By reading I've decided that I want to run a FULL node (let's call it 'X'), to contribute to the P2P network. So, I'll leave its ports open, or have a DMZ zone with a public IP address in it. But this comes with security risks, so I will not have any funds in this instance of the Bitcoin Core QT client. Then, I will k # The username and password MUST NOT be the same. # How many seconds bitcoin will wait for a complete RPC HTTP request # after the HTTP connection is established. # By default, only RPC connections from. trending; Bitcoin.conf Addnode Bitcoin . Bitcoin.conf Addnode . Apr 16, 2018 DTN Staff. twitter. pinterest. google plus. facebook . 20160106-bitcoin.conf Github ...

[index] [16092] [28491] [16370] [28785] [22621] [2896] [23034] [37427] [21611] [30392]

Dapscoin - Masternode

addnode= addnode= chmod +x dapscoin.conf cd 4ºPASSO: DAR PERMISSÕES PROS ARQUIVOS cd /usr/local/bin/ chmod +x dapscoind chmod +x dapscoin-cli chmod +x dapscoin-qt cd ... In this video we are going to learn how to build bitcoin from source and run it on linux. We are using Ubuntu 16.04 for this tutorial but you can use your favourite flavour of linux. https ... create file bitconnectx.conf in C:\Users\your_compuer_name\AppData\Roaming\bitconnectx and add nodes: addnode= addnode= In this video, we go through different nodes and a basic introduction to myNode. myNode's value proposition is that it takes Bitcoin Core and layers on software on top of it, making the most of ... Two interviews in this episode with Pierre Rochard and Ketan from Ministry of Nodes. Pierre and I discuss his Node Launcher which is quite possibly the easiest way to start up a Bitcoin+LND ...